2020-04 | Facile Enhancement of Optical Sensitivity in GaN Ultraviolet Photodetectors by Using In-Situ Plano-Convex Polymer Lens | 소홍윤 |
2021-12 | Facile Manufacturing of Capacitive Flow Meters Using Indirect Three-Dimensional Printing Technology for Rectifying Airflows | 소홍윤 |
2020-04 | Facile method for reducing decay time in GaN-based ultraviolet photodetector using microheater | 소홍윤 |
2020-01 | Facile microfabrication of 3-dimensional (3D) hydrophobic polymer surfaces using 3D printing technology | 소홍윤 |
2022-04 | Facile microfabrication of three dimensional-patterned micromixers using additive manufacturing technology | 소홍윤 |
2022-07 | Flexible and cracked polymer membrane for thermal-expansive reversible fuses using three-dimensional groove patterns | 소홍윤 |
2017-12 | Graphene-enhanced gallium nitride ultraviolet photodetectors under 2 MeV proton irradiation | 소홍윤 |
2014-05 | Hierarchical Silicon Nanospikes Membrane for Rapid and High-Throughput Mechanical Cell Lysis | 소홍윤 |
2017-02 | Highly antireflective AlGaN/GaN ultraviolet photodetectors using ZnO nanorod arrays on inverted pyramidal surfaces | 소홍윤 |
2018-05 | Impact of thermally dead volume on phonon conduction along silicon nanoladders | 소홍윤 |
2017-01 | Improved Dielectric Properties of Polyvinylidene Fluoride Nanocomposite Embedded with Poly(vinylpyrrolidone)-Coated Gold Nanoparticles | 소홍윤 |
2016-01 | Interdigitated Pt-GaN Schottky interfaces for high-temperature soot-particulate sensing | 소홍윤 |
2017-03 | Lithography-free microfabrication of AlGaN/GaN 2DEG strain sensors using laser ablation and direct wire bonding | 소홍윤 |
2016-01 | Low-resistance gateless high electron mobility transistors using three-dimensional inverted pyramidal AlGaN/GaN surfaces | 소홍윤 |
2019-10 | Maskless microfabrication of nanowire-decorated porous membrane for rapid purification of contaminated water | 소홍윤 |
2016-09 | A microfabricated sun sensor using GaN-on-sapphire ultraviolet photodetector arrays | 소홍윤 |
2019-03 | Microfabricaton of microfluidic check valves using comb-shaped moving plug for suppression of backflow in microchannel | 소홍윤 |
2021-06 | Modeling and application of anisotropic hyperelasticity of PDMS polymers with surface patterns obtained by additive manufacturing technology | 소홍윤 |
2013-10 | Nanowire-integrated microporous silicon membrane for continuous fluid transport in micro cooling device | 소홍윤 |
2022-02 | Noncontact thermal mapping method based on local temperature data using deep neural network regression | 소홍윤 |
2016-08 | Origin and hysteresis of lithium compositional spatiodynamics within battery primary particles | 소홍윤 |
2021-04 | Photocurrents Recovery in GaN UV Sensors Using Microheaters at Low Temperatures | 소홍윤 |
2016-06 | Rapid fabrication and packaging of AlGaN/GaN high-temperature ultraviolet photodetectors using direct wire bonding | 소홍윤 |
2021-06 | Rapid manufacturing of micro-drilling devices using FFF-type 3D printing technology | 소홍윤 |
2021-01 | Realization of superhydrophobic surfaces based on three-dimensional printing technology | 소홍윤 |
2014-08 | Refillable and magnetically actuated drug delivery system using pear-shaped viscoelastic membrane | 소홍윤 |
2020-09 | Simple Fabrication of Water Harvesting Surfaces Using Three Dimensional Printing Technology | 소홍윤 |
2021-09 | Simple Fabrication of Water Harvesting Surfaces Using Three-Dimensional Printing Technology | 소홍윤 |
2015-12 | Simultaneous Thermoelectric Property Measurement and Incoherent Phonon Transport in Holey Silicon | 소홍윤 |
2022-01 | Structural effects of 3D printing resolution on the gauge factor of microcrack-based strain gauges for health care monitoring | 소홍윤 |