2005-03 | LIEF와 MIE 산란 방법을 이용한 직분식 가솔린 엔진의 스월 및 슬릿 인젝터의 분무 특성 | 이기형 |
2003-01 | Mie 산란방법과 엔트로피 해석 방법을 이용한 혼합연료비에 따른 분무 균질도 특성에 관한 연구 | 이기형 |
2009-05 | MIXER 종류에 따른 LNT환원제 분무 영향에 관한 연구 | 이기형 |
2017-02 | Numerical model and simulation of a vehicular heat storage system with phase-change material | 이기형 |
2020-04 | On-board LPG reforming system for an LPG . hydrogen mixed combustion engine | 이기형 |
2017-08 | Optimization and calibration strategy using design of experiment for a diesel engine | 이기형 |
2001-03 | Optimization of the intake port shape for a five-valve gasoline engine | 이기형 |
2021-01 | Optimization Studies of AC4CH Material in the Cylinder Block of a Diesel Engine Application | 이기형 |
2022-04-15 | Performance evaluation of the LPG engine applied to catalytic reforming system for producing hydrogen | 이기형 |
2003-11 | PIV와 엔트로피 해석을 이용한 GDI엔진 내 분무 및 유동 틋성 해석에 관한 실험적 연구 | 이기형 |
2019-10 | Prediction of turbocharged diesel engine performance equipped with an electric supercharger using 1D simulation | 이기형 |
2009-05 | A preliminary study for applying the Atkinson cycle on the 2-stage injection type PCCI engine | 이기형 |
2005-02 | Quantitative measurements of soot particles in a laminar diffusion flame using a LII/LIS technique | 이기형 |
2005-01 | Quantitative Measurements of soot particles in laminar diffusion flame using a LII/LIS technique | 이기형 |
2006-07 | SCCI 방법을 이용한 직분식 가솔린 엔진내의 압축비 및 흡기 온도 변화에 따른 연소 및 배기 특성에 관한 실험적 연구 | 이기형 |
2002-03 | SCV에 의한 스월 유동이 직분식 디젤 엔진의 연소에 미치는 영향에 관한 연구 | 이기형 |
2015-06 | SECFR 시스템의 차량적용을 위한 분무균일도향상에 관한 연구 | 이기형 |
2021-12-13 | Simulation and Motor Test Considering Engine Experiment Validation of Electric Turbocharger for 1.6-L Diesel Engine | 이기형 |
2015-01 | Spray and atomization characteristics of isobutene blended DME fuels | 이기형 |
2005-10 | THE SPRAY CHARACTERISTICS OF SWIRL AND SLIT INJECTOR USED TO DISI ENGINE USING LIEF AND MIE-SCATTERING METHOD | 이기형 |
2001-01 | Spray structure and characteristics of high-pressure gasoline injectors for direct-injection engine applications | 이기형 |
2000-02 | Spray-Wall Interaction Model Considering Superheating Degree of the Wall Surface | 이기형 |
2023-01 | Stability characteristics according to cumulative time after manufacturing of water emulsion fuel prepared by porous membrane method for low-pollutant engines | 이기형 |
2015-07 | The study of a thermoelectric generator with various thermal conditions of exhaust gas from a diesel engine | 이기형 |
2008-03 | A Study of the Characteristics of Mixture Formation and Combustion in a PCCI Engine Using an Early Multiple Injection Strategy | 이기형 |
2002-01 | A study on the atomization and fuel film characteristics of air shrouded injectors | 이기형 |
2007-01 | A Study on the Characteristics of Spray and Combustion in a HCCI Engine according to Various Injection Angles and Timings | 이기형 |
2005-05 | A Study on the Effect of Stratified Mixture Formation on Combustion Characteristics in a Constant Volume Combustion Chamber | 이기형 |
2008-05 | A Study on the Optimal Injection Conditions for an HC-LNT Catalyst System with a 12-Hole Type Injector | 이기형 |
2008-04 | Study on the Spray Behavior and Diesel Fuel Distribution Characteristics of a Secondary Injector for a Lean NOx Trap Catalyst | 이기형 |