Development and feasibility assessment of on-board catalytic reforming system for LPG engine to produce hydrogen in the transient state
- Title
- Development and feasibility assessment of on-board catalytic reforming system for LPG engine to produce hydrogen in the transient state
- Author
- 우승철
- Keywords
- Liquefied petroleum gas (LPG); On -board catalytic reforming; Adding hydrogen; Transient state; Control optimization
- Issue Date
- 2022-12
- Publisher
- ELSEVIER SCI LTD
- Citation
- APPLIED ENERGY, v. 327, article no. 12005, page. 1-13
- Abstract
- Despite tightening greenhouse gas regulations and the trend of electrification of power train, if hybrid systems are considered, internal combustion engines are expected to be used consistently. Therefore, research on lowemission engines that can be instantly applied should be continued. Liquefied petroleum gas is a low pollutant fuel applicable to spark ignition engines as an alternative fuel. In this study, to maximize the advantages of liquefied petroleum gas, a catalytic reforming system was applied to an internal combustion engine and tested under actual operating conditions. A catalytic reforming system is a technology that reforms a part of the fuel supplied to the engine through a reforming catalyst and supplies it to the intake manifold. When properly controlled, fuel efficiency and pollutant emissions can be improved. To effectively operate the system, the engine was controlled by dividing operating conditions into a general driving zone, a lean burn zone, and a catalytic reforming zone. finally, the fuel efficiency and NOx emissions were evaluated. As a result of the evaluation under the modified FTP-72 condition, NOx emission was reduced by 22.83%, and fuel efficiency was improved by 3.01%.
- URI
- https://www.sciencedirect.com/science/article/pii/S0306261922013101?via%3Dihubhttps://repository.hanyang.ac.kr/handle/20.500.11754/191058
- ISSN
- 0306-2619; 1872-9118
- DOI
- 10.1016/j.apenergy.2022.120053
- Appears in Collections:
- RESEARCH INSTITUTE[E](부설연구소) > RESEARCH INSTITUTE OF ENGINEERING & TECHNOLOGY(공학기술연구소) > Articles
- Files in This Item:
There are no files associated with this item.
- Export
- RIS (EndNote)
- XLS (Excel)
- XML