CFD를 활용한 DOC-DPF 조합의 유동 균질도 분석
- Title
- CFD를 활용한 DOC-DPF 조합의 유동 균질도 분석
- Other Titles
- Flow Uniformity Analysis of DOC-DPF System using CFD
- Author
- 박성욱
- Keywords
- 후처리장치; 배플; 전산유체역학; 균질도; Aftertreatment system; Baffle; Computational fluid dynamics; Uniformity
- Issue Date
- 2019-09
- Publisher
- 한국분무공학회
- Citation
- 한국분무공학회지, v. 24, no. 3, Page. 122-129
- Abstract
- Flow uniformity in aftertreatment system is an important factor in determining uniform catalytic reaction and filtration. In this study, variety types of DOC-DPF system design were analyzed to increase flow uniformity. For this analysis, ANSYS Fluent was used with porous media setup for DOC and DPF. Turbulent flow was modeled by standard k-ε model excepting porous media. Uniformity index was utilized to evaluate the flow uniformity quantitatively. Reference design showed low velocity region because two large vortex were generated before baffle. When radius of DOC-DPF system was increased, exhaust pressure acting on the inlet decreases and velocity distribution was shifted to one side. When inlet pipe was set to axial center of DOC-DPF system velocity distribution was symmetric. However, flow was not dissipated until the front end of DOC and showed higher uniformity index. When the volume of DOC was reduced while fixed volume of entire DOCDPF system and baffle plate is located downstream of the DOC-DPF system, there was improvement in uniformity index.
- URI
- http://koreascience.or.kr/article/JAKO201928965447520.pagehttps://repository.hanyang.ac.kr/handle/20.500.11754/153698
- ISSN
- 1226-2277; 2288-9051
- DOI
- 10.15435/JILASSKR.2019.24.3.122
- Appears in Collections:
- COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
- Files in This Item:
There are no files associated with this item.
- Export
- RIS (EndNote)
- XLS (Excel)
- XML