2023-01 | 3D-Printed Patient-Specific Circles of Willis with an Intracranial Aneurysm and their Application to Neurointerventional Endovascular Simulation | 오제훈 |
2020-10 | 808 nm 조명 레이저 및 광학 필터를 이용한 아크 용접 현상 고속촬영 기법 | 오제훈 |
2012-09 | All-inkjet-printed electrical components and circuit fabrication on a plastic substrate | 오제훈 |
2012-05 | Arbitrary, Complex Cell Patterning via Inkjet Printing of a Cell Membrane-Anchoring Polymer | 오제훈 |
2020-10 | CFRTP-SPFC980Y 이종소재 접합부 기계적 특성 평가 | 오제훈 |
2021-08 | Characterization of PI/PVDF-TrFE Composite Nanofiber-Based Triboelectric Nanogenerators Depending on the Type of the Electrospinning System | 오제훈 |
2004-10 | Co-cure bonding method for foam core composite sandwich manufacturing | 오제훈 |
2021-08 | Computational Study of Hemodynamic Changes Induced by Overlapping and Compacting of Stents and Flow Diverter in Cerebral Aneurysms | 오제훈 |
2016-01 | Control of Evaporation Behavior of an Inkjet-Printed Dielectric Layer Using a Mixed-Solvent System | 오제훈 |
2013-11 | Control of surface wettability for inkjet printing by combining hydrophobic coating and plasma treatment | 오제훈 |
2015-05 | Control of the crystalline structure of inkjet-printed semiconductor layers using overlap condition and surface wettability | 오제훈 |
2010-05 | Crack formation and substrate effects on electrical resistivity of inkjet-printed Ag lines | 오제훈 |
2022-10 | Deposition quality and efficiency improvement method for additive manufacturing of Ti-6Al-4V using gas metal arc with CMT | 오제훈 |
2009-06 | Development of Micro Desktop Forming System for Fluid Dynamic Bearing Forming Process | 오제훈 |
2012-11 | Direct fabrication of microelectrodes on a polymer substrate using selective ultrashort pulsed laser ablation of inkjet-printed Ag lines | 오제훈 |
2009-09 | Dynamic characteristics measurements of inkjet-printed thin films of nanosilver suspensions on a flexible plastic substrate | 오제훈 |
2007-06 | Effect of adhesive thickness and bonding length on behavior of composite adhesive joints subject to torsion | 오제훈 |
2007-03 | Effect of Fiber Arrangement on Residual Thermal Stress Distributions in a Unidirectional Composite | 오제훈 |
2014-05 | Effect of inlet velocity profile and entrance length on hemodynamic factors for intracranial aneurysms | 오제훈 |
2011-08 | Effects of plasma surface treatments on inkjet-printed feature sizes and surface characteristics | 오제훈 |
2013-11 | Electrical sintering characteristics of inkjet-printed conductive Ag lines on a paper substrate | 오제훈 |
2014-10 | Electrohydrodynamic 직접 패터닝 기반 표면 젖음성 제어 | 오제훈 |
2014-05 | Electrohydrodynamic 프린팅 기반 폴리머 용액의 마이크로/나노 정밀 패터닝 | 오제훈 |
2010-05 | Evaluation of the limit-of-detection capability of carbon black-polymer composite sensors for volatile breath biomarkers | 오제훈 |
2010-05 | Fabrication and Ink-Jet Patterning of Copper Nanoparticles with Improved Dispersion Stability | 오제훈 |
2018-05 | Fabrication of fine metal patterns using an additive material extrusion process with a molten metal | 오제훈 |
2021-04 | Fabrication of hierarchically porous structured PDMS composites and their application as a flexible capacitive pressure sensor | 오제훈 |
2013-10 | Fabrication of high-resolution conductive lines by combining inkjet printing with soft lithography | 오제훈 |
2017-08 | Fabrication of highly sensitive capacitive pressure sensors with electrospun polymer nanofibers | 오제훈 |
2019-07 | Fabrication of highly sensitive capacitive pressure sensors with porous PDMS dielectric layer via microwave treatment | 오제훈 |