Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 서태원 | - |
dc.date.accessioned | 2018-11-26T07:42:12Z | - |
dc.date.available | 2018-11-26T07:42:12Z | - |
dc.date.issued | 2016-09 | - |
dc.identifier.citation | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v. 30, no. 9, page. 4337-4343 | en_US |
dc.identifier.issn | 1738-494X | - |
dc.identifier.issn | 1976-3824 | - |
dc.identifier.uri | https://link.springer.com/article/10.1007%2Fs12206-016-0848-4 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/80652 | - |
dc.description.abstract | Underwater manipulators are very important for a robot to perform a specific operation in water. Conventional robot arm manipulators have been suggested for various operations but have not been suitable for repeated motion in gathering something. This paper presents a new underwater manipulator design for gathering things such as starfish on the sea floor. The manipulator is composed of a four-bar linkage to achieve repeated motion along a loop and compliant linkages to enhance the efficiency of the gathering work. Kinematic and quasi-static analyses were performed to calculate the loop path and the reaction force at the actuation point. Based on the analysis, optimal design was performed to maximize the working distance with the height difference and the reaction moments considered as constraints. A prototype was assembled to test the performance of the manipulator, and the empirical loop path was compared to simulation results. | en_US |
dc.description.sponsorship | This research was supported by a grant from the National Research Foundation (NRF) of Korea, funded by the Ministry of Education, Science and Technology (MEST) of the Korean government (no. 2011-0009596). | en_US |
dc.language.iso | en | en_US |
dc.publisher | KOREAN SOC MECHANICAL ENGINEERS | en_US |
dc.subject | Underwater manipulator | en_US |
dc.subject | Four-bar linkage mechanism | en_US |
dc.subject | Compliant mechanism | en_US |
dc.subject | Optimization | en_US |
dc.subject | Quasi-static analysis | en_US |
dc.title | Design, modeling, and optimization of an underwater manipulator with four-bar mechanism and compliant linkage | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1007/s12206-016-0848-4 | - |
dc.relation.journal | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.contributor.googleauthor | Jin, Sangrok | - |
dc.contributor.googleauthor | Kim, Jihoon | - |
dc.contributor.googleauthor | Bae, Jangho | - |
dc.contributor.googleauthor | Seo, TaeWon | - |
dc.contributor.googleauthor | Kim, Jongwon | - |
dc.relation.code | 2016004527 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | taewonseo | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.