Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 홍정표 | - |
dc.date.accessioned | 2018-07-03T07:41:54Z | - |
dc.date.available | 2018-07-03T07:41:54Z | - |
dc.date.issued | 2016-06 | - |
dc.identifier.citation | JOURNAL OF MAGNETICS, v. 21, NO 2, Page. 209-214 | en_US |
dc.identifier.issn | 1226-1750 | - |
dc.identifier.issn | 2233-6656 | - |
dc.identifier.uri | http://koreascience.or.kr/article/ArticleFullRecord.jsp?cn=E1MGAB_2016_v21n2_209 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/72328 | - |
dc.description.abstract | This paper analyzes the magnetic property according to the machined shape of steel material with non-oriented silicon steel (50PN470/50A470), that is most commonly used in the design of electrical equipment. Toward this end, specimens were produced and divided into Bar-Specimen (Epstein Frame Tester) and Ring-Specimen (Toroidal Ring Tester). The characteristics of the electrical Silicon steel were measured using the instruments solely dedicated to measuring each specimen. The core loss of the Bar-Specimen, which is commonly used, was found to be less than that of the Ring-Specimen. This is a very important design factor in achieving the objectives of improving the product efficiency and predicting the performance of electrical equipment. It serves as a critical point of view in order to reduce the error between design value and product value. A comparative analysis was conducted regarding various characteristics (Hysteresis, B-H characteristic, Iron loss, Minor loop, Coercive force, Residual magnetic flux density, etc.) of the electrical silicon steel considered in the design of the electrical equipment according to the specimen. | en_US |
dc.description.sponsorship | This research was supported by the MSIP (Ministry of Science, ICT and Future Planning), Korea, under the CITRC (Convergence Information Technology Research Center) (IITP-2015-H8601-15-1005) supervised by the IITP (Institute for Information & communication Technology Promotion). | en_US |
dc.language.iso | en | en_US |
dc.publisher | KOREAN MAGNETICS SOC | en_US |
dc.subject | electrical steel | en_US |
dc.subject | Bar-Specimen | en_US |
dc.subject | Ring-Specimen | en_US |
dc.subject | magnetic properties | en_US |
dc.title | The Magnetic Properties of Electrical Steel for Rotating Machine according to the Specimen | en_US |
dc.type | Article | en_US |
dc.relation.no | 2 | - |
dc.relation.volume | 21 | - |
dc.identifier.doi | 10.4283/JMAG.2016.21.2.209 | - |
dc.relation.page | 209-214 | - |
dc.relation.journal | JOURNAL OF MAGNETICS | - |
dc.contributor.googleauthor | Choi, Yun-Yong | - |
dc.contributor.googleauthor | Chin, Jun-Woo | - |
dc.contributor.googleauthor | Hong, Jung-Pyo | - |
dc.relation.code | 2016011834 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DEPARTMENT OF AUTOMOTIVE ENGINEERING | - |
dc.identifier.pid | hongjp | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.