Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최창식 | - |
dc.date.accessioned | 2018-04-26T06:03:38Z | - |
dc.date.available | 2018-04-26T06:03:38Z | - |
dc.date.issued | 2013-09 | - |
dc.identifier.citation | Advances in Structual Engineering and Mechanics(ASEM13),September 8-12,2013 | en_US |
dc.identifier.uri | http://www.i-asem.org/publication_conf/asem13/365.W2B.5.SM130_1553F.pdf | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/70801 | - |
dc.description.abstract | Headed bars were developed to address the problems that arise from the use of conventional anchorage. Previous researchers evaluated anchorage capacity of headed bars in lap splice region and CCT node. However, anchorage tests in TTC node have not been conducted. TTC Node exists in an anchorage region of cut-off tensile bars. For a wide use of headed bar, anchorage tests in TTC node should be conducted. Therefore, in this research, anchorage capacity of headed bar in TTC node was evaluated. For this TTC node tests, which consider cut-off region, were conducted. The transverse reinforcement was considered as variables. Test results present that each specimen show different failure mode according to transverse bar. Failure of specimen without transverse bar is determined by tensile failure of concrete around the head. Failure of specimen with transverse bars is determined by yield of transverse bars. The transverse bars show effect on increase of anchorage capacity. Specimens with transverse bars present the greater anchorage capacity than specimens without transverse bars. | en_US |
dc.description.sponsorship | This work was supported by the Nuclear Power of the Korea institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy. (No.2011T100200162) | en_US |
dc.language.iso | en | en_US |
dc.publisher | Techno-Press | en_US |
dc.title | Evaluation on Anchorage Capacity of Headed Bars with Large Diameter in TTC Node | en_US |
dc.title.alternative | TTC 절점 내 대구경 확대머리 철근의 정착성능 평가 | en_US |
dc.type | Article | en_US |
dc.relation.page | 3802-3805 | - |
dc.contributor.googleauthor | Jung, Hyung-Suk | - |
dc.contributor.googleauthor | Kim, Kyoung-Joo | - |
dc.contributor.googleauthor | Choi, Chang-Sik | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DEPARTMENT OF ARCHITECTURAL ENGINEERING | - |
dc.identifier.pid | ccs5530 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.