Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 송시몬 | - |
dc.date.accessioned | 2018-04-03T05:47:23Z | - |
dc.date.available | 2018-04-03T05:47:23Z | - |
dc.date.issued | 2014-12 | - |
dc.identifier.citation | JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 권: 24, 호: 12 | en_US |
dc.identifier.issn | 1361-6439 | - |
dc.identifier.uri | http://iopscience.iop.org/article/10.1088/0960-1317/24/12/127001/meta | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/56570 | - |
dc.description.abstract | A facile method for the moldless fabrication of 2- or 3-dimensional microparticles is proposed by using a photopolymerization technique. Using only a monomer solution of tripropylene glycol diacrylate, a film mask and standard UV lithography equipment, we were able to fabricate microparticles of various shapes, such as disks, dimpled disks similar in shape to red blood cells, and slender gourd shapes, unlike previous moldless fabrication techniques requiring expensive and/or sophisticated equipment. The simple method could produce more than one million particles in a single batch, indicating that it can be applied to the mass production of polymer microparticles. Analyses of scanning electron micrographs and optical micrographs of the microparticles indicated that their size distribution was highly monodisperse. Detailed fabrication processes and statistics on the microparticle sizes are given in this paper. | en_US |
dc.description.sponsorship | This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF), funded by the Ministry of Education, Science and Technology (2013R1A2A2A01014234 and 2012R1A6A1029029). | en_US |
dc.language.iso | other | en_US |
dc.publisher | IOP PUBLISHING LTD, TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND | en_US |
dc.subject | moldless fabrication | en_US |
dc.subject | particle | en_US |
dc.subject | photopolymerization | en_US |
dc.subject | dimpled disk | en_US |
dc.title | Facile moldless fabrication of disk-shaped and reed blood cell-like microparticles using photopolymerization of tripropylene glycol diacrylate | en_US |
dc.type | Article | en_US |
dc.relation.no | 12 | - |
dc.relation.volume | 24 | - |
dc.identifier.doi | 10.1088/0960-1317/24/12/127001 | - |
dc.relation.page | 1-5 | - |
dc.relation.journal | JOURNAL OF MICROMECHANICS AND MICROENGINEERING | - |
dc.contributor.googleauthor | Choi, Jongchul | - |
dc.contributor.googleauthor | Won, June | - |
dc.contributor.googleauthor | Song, Simon | - |
dc.relation.code | 2014033827 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | simonsong | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.