Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 금영탁 | - |
dc.date.accessioned | 2018-04-02T05:39:56Z | - |
dc.date.available | 2018-04-02T05:39:56Z | - |
dc.date.issued | 2013-05 | - |
dc.identifier.citation | 한국소성가공학회 학술대회 논문집, P.174-176 | en_US |
dc.identifier.uri | http://www.dbpia.co.kr/Journal/ArticleDetail/NODE06762637 | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/54779 | - |
dc.description.abstract | In order to reducing the facility cost of the expanding process in the roll forming of eco-friendly studs, the side roll method was introduced. The stress and strain distributions obtained from the finite element process simulation were examined for the design analysis of the expanding process. The side roll method employed instead of the general upperand-lower roll one can cut down the expanding process length about 40% and reduce the manufacturing cost of dies 60%. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 한국소성가공학회 | en_US |
dc.subject | Side Roll | en_US |
dc.subject | Expanding Process | en_US |
dc.subject | FEM Process Analysis | en_US |
dc.subject | Dry Wall | en_US |
dc.subject | Eco-friendly Stud | en_US |
dc.subject | Upper-and-Lower Roll | en_US |
dc.subject | Roll Forming Process | en_US |
dc.title | 친환경 스터드의 확장 공정 설계에 관한 연구 | en_US |
dc.title.alternative | Study on the Design of Expanding Process for Eco-friendly Studs | en_US |
dc.type | Article | en_US |
dc.relation.page | 174-176 | - |
dc.contributor.googleauthor | 이태희 | - |
dc.contributor.googleauthor | 이승열 | - |
dc.contributor.googleauthor | 금영탁 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | ytkeum | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.