Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 엄석기 | - |
dc.date.accessioned | 2018-03-30T01:34:34Z | - |
dc.date.available | 2018-03-30T01:34:34Z | - |
dc.date.issued | 2012-11 | - |
dc.identifier.citation | 한국자동차공학회 추계학술대회 및 전시회, 2012, 2012(11), P.2363-2367 | en_US |
dc.identifier.uri | http://www.dbpia.co.kr/Journal/ArticleDetail/NODE02083887 | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/54111 | - |
dc.description.abstract | This paper describes thermal modeling of a line start permanent magnet (LSPM) motor using a computational flow dynamics method. First, 2-dimensional electromagnetic design is carried out in order to comprehend heat losses at winding, stator, rotor and cage. New coupling method called Heat mapping method (HMM) will be introduced which converts 2-D information of electromagnetic domain to 3-D information of thermal domain. Transient thermal analysis under rated operating conditions is performed to identify the load saturation time and temperatures in the LSPM motor. Experimental results are collected under the same operating conditions and computational results are verified against the experimental data. Finally, thermal path analysis at a steady-state is conducted to figure out the direction and magnitude of heat flux in the LSPM motor. These results can be useful to design effective cooling systems of electrical motors. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 한국자동차공학회 / The Korean Society Of Automotive Engineers | en_US |
dc.subject | 유도 기동형 동기 전동기 | en_US |
dc.subject | 열 해석 | en_US |
dc.subject | 비정상 3차원 | en_US |
dc.subject | 열손실 사상법 | en_US |
dc.subject | Line start permanent motor | en_US |
dc.subject | Thermal modeling | en_US |
dc.subject | Unsteady threedimensional | en_US |
dc.subject | Heat loss mapping method | en_US |
dc.title | 열 사상법을 이용한 유도 기동형 동기 전동기의 비정상 3차원 열해석 | en_US |
dc.title.alternative | Advanced unsteady three-dimensional thermal modeling of a line start permanent motor using a heat loss mapping method | en_US |
dc.type | Article | en_US |
dc.relation.page | 2363-2367 | - |
dc.contributor.googleauthor | 김치원 | - |
dc.contributor.googleauthor | 엄석기 | - |
dc.contributor.googleauthor | Kim, Chiwon | - |
dc.contributor.googleauthor | Um, Sukkee | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | sukkeeum | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.