Full metadata record

DC FieldValueLanguage
dc.contributor.author정규선-
dc.date.accessioned2018-03-27T00:07:26Z-
dc.date.available2018-03-27T00:07:26Z-
dc.date.issued2014-11-
dc.identifier.citationJOURNAL OF NUCLEAR MATERIALS, 463, p.424-427en_US
dc.identifier.issn0022-3115-
dc.identifier.issn1873-4820-
dc.identifier.urihttp://www.sciencedirect.com/science/article/pii/S0022311514008782?via%3Dihub-
dc.identifier.urihttp://hdl.handle.net/20.500.11754/52771-
dc.description.abstractThe upstream scrape-off layer (SOL) profiles and downstream particle fluxes are measured with a fast reciprocating Langmuir probe assembly (FRLPA) at the outboard mid-plane and a fixed edge Langmuir probe array (ELPA) at divertor region, respectively in the KSTAR. It is found that the SOL has a two-layer structure in the outboard wall-limited (OWL) ohmic and L-mode: a near SOL (similar to 5 mm zone) with a narrow feature and a far SOL with a broader profile. The near SOL width evaluated from the SOL profiles in the OWL plasmas is comparable to the scaling for the L-mode divertor plasmas in the JET and AUG. In the SOL profiles and the divertor particle flux profile during the ELMy H-modes, the characteristic e-folding lengths of electron temperature, plasma density and particle flux during an ELM phase are about two times larger than ones at the inter ELM. (C) 2014 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipThis work was supported by Korea Ministry of Science, ICT and Future Planning under the KSTAR project contract, and was partly supported by Korea Research Council of Fundamental Science and Technology (KRCF) under the international collaboration & research in Asian countries.en_US
dc.language.isoenen_US
dc.publisherELSEVIER SCIENCE BV, PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDSen_US
dc.subjectH-MODE DISCHARGESen_US
dc.subjectALCATOR C-MODen_US
dc.subjectHEAT-FLUXen_US
dc.titleInvestigation of SOL parameters and divertor particle flux from electric probe measurements in KSTARen_US
dc.typeArticleen_US
dc.identifier.doi10.1016/j.jnucmat.2014.11.075-
dc.relation.page1-4-
dc.relation.journalJOURNAL OF NUCLEAR MATERIALS-
dc.contributor.googleauthorBak, J. G-
dc.contributor.googleauthorKim, H.S.-
dc.contributor.googleauthorBae, M.K.-
dc.contributor.googleauthorJuhn, J.W.-
dc.contributor.googleauthorSeo, D.C.-
dc.contributor.googleauthorBang, E.N.-
dc.contributor.googleauthorShim, S.B.-
dc.contributor.googleauthorChung, K.S.-
dc.contributor.googleauthorLee, H.J.-
dc.contributor.googleauthorHong, S.H.-
dc.relation.code2014034021-
dc.sector.campusS-
dc.sector.daehakCOLLEGE OF ENGINEERING[S]-
dc.sector.departmentDIVISION OF ELECTRICAL AND BIOMEDICAL ENGINEERING-
dc.identifier.pidkschung-
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > ELECTRICAL AND BIOMEDICAL ENGINEERING(전기·생체공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE