2013-11 | GalaxyDock2: Protein-Ligand Docking Using Beta-Complex and Global Optimization | 김덕수 |
2014-03 | Unified mechanism synthesis method of a planar four-bar linkage for path generation employing a spring-connected arbitrarily sized rectangular block model | 유홍희 |
2013-11 | Magnetorheological elastomer with stiffness-variable characteristics based on induced current applied to differential mount of vehicles | 오재응 |
2014-10 | 미세유동을 이용한 공액 고분자 센서 섬유 제작 | 송시몬 |
2014-04 | Ultra-fast annealing to reduce the residual stress in ultra-thin chips using flash light | 김학성 |
2014-04 | Characterization of three- and four-point bending properties of porous metal fiber sintered sheet | Kwan-San Hui |
2012-12 | Shrinking and Growing: Grain Boundary Density Reduction for Efficient Polysilicon Thin-Film Solar Cells | 김동립 |
2013-09 | Characterization of the spray atomization process of a multi-hole gasoline direct injector based on measurements using a phase Doppler particle analyser | 박성욱 |
2014-03 | Gaussian diffusion sphere model to predict deposition velocities under the combined effects of electrophoresis and thermophoresis | 육세진 |
2013-09 | Analysis of the oil injection process in fluid dynamic bearings of the spindle motor of computer hard disk drives | 장건희 |
2013-09 | Magnetically induced vibration of a flexible rotating disk-spindle system due to the internal magnetic force arising from the spindle motor of a HDD | 장건희 |
2013-09 | Behavior analysis of air bubbles in the oil lubricant of FDBs at low speed operating conditions | 장건희 |
2013-09 | Optimal design of fluid dynamic bearings to develop a robust disk-spindle system in a hard disk drive utilizing modal analysis | 장건희 |
2012-11 | 탈질설비 촉매층 전단의 유속균일도 예측 | 이재헌 |
2012-11 | 탈황설비용 습분제거기 내 물입자의 거동 예측 | 이재헌 |
2013-11 | 수직이착륙 추진용 덕티드팬 무인항공기의 외풍이 존재할 때 팁간극의 영향에 대한 전산해석 | 조진수 |
2014-11 | 테라헤르츠(THz) 파를 이용한 은 나노와이어의 비접촉식 면저항 측정에 관한 연구 | 김학성 |
2013-07 | CW 레이저 조사에 의한 실리콘 웨이퍼의 균열 손상분석 | 장경영 |
2014-03 | Optimum design of a radial heat sink with a fin-height profile for high-power LED lighting applications | 육세진 |
2014-03 | Design optimization of a carbon fiber reinforced composite automotive lower arm | 김학성 |