Repository at Hanyang UniversityCOLLEGE OF ENGINEERING[S](공과대학)MECHANICAL ENGINEERING(기계공학부)Articles
402
0
Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | 장경영 | - |
| dc.date.accessioned | 2018-03-12T06:11:34Z | - |
| dc.date.available | 2018-03-12T06:11:34Z | - |
| dc.date.issued | 2013-05 | - |
| dc.identifier.citation | ADVANCES IN MATERIALS SCIENCE AND ENGINEERING; 2013, 6p. | en_US |
| dc.identifier.issn | 1687-8434 | - |
| dc.identifier.uri | https://www.hindawi.com/journals/amse/2013/407846/abs/ | - |
| dc.identifier.uri | http://hdl.handle.net/20.500.11754/45422 | - |
| dc.description.sponsorship | The nonlinear ultrasonic technique has been known to be more sensitive to minute variation of elastic properties in material than the conventional linear ultrasonic method. In this study, the ultrasonic nonlinear characteristics in the heat-treated aluminum alloy (Al-Mg-Si-Cu) have been evaluated. For this, the specimens were heat treated for various heating period up to 50 hours at three different heating temperatures: 250 degrees C, 300 degrees C, and 350 degrees C. The ultrasonic nonlinear characteristics of each specimen were evaluated by measuring the ultrasonic nonlinear parameter beta from the amplitudes of fundamental and second harmonic frequency components in the transmitted ultrasonic wave. After the ultrasonic test, tensile strengths and elongations were obtained by the tensile test to compare with the parameter beta The heating time showing a peak in the parameter beta was identical to that showing critical change in the tensile strength and elongation, and such peak appeared at the earlier heating time in the higher heating temperature. These results suggest that the ultrasonic nonlinear parameter beta can be used for monitoring the variations in elastic properties of aluminum alloys according to the heat treatment. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | HINDAWI PUBLISHING CORPORATION | en_US |
| dc.title | Evaluation of Ultrasonic Nonlinear Characteristics in Heat-Treated Aluminum Alloy | en_US |
| dc.type | Article | en_US |
| dc.identifier.doi | 10.1155/2013/407846 | - |
| dc.relation.page | 538-542 | - |
| dc.contributor.googleauthor | Jhang, Kyung-Young | - |
| dc.contributor.googleauthor | Kim, JongBeom | - |
| dc.sector.campus | S | - |
| dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
| dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
| dc.identifier.pid | kyjhang | - |
- Appears in Collections:
- COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
- Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
