Repository at Hanyang UniversityCOLLEGE OF ENGINEERING[S](공과대학)MECHANICAL ENGINEERING(기계공학부)Articles
192
0
Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | 이관수 | - |
| dc.date.accessioned | 2018-03-09T01:42:09Z | - |
| dc.date.available | 2018-03-09T01:42:09Z | - |
| dc.date.issued | 2013-04 | - |
| dc.identifier.citation | Energy and Buildings, April 2013, 59, P.228-235 | en_US |
| dc.identifier.issn | 0378-7788 | - |
| dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S0378778812006688?via%3Dihub | - |
| dc.identifier.uri | http://hdl.handle.net/20.500.11754/43930 | - |
| dc.description.abstract | We numerically analyzed the effect of the placement of a top discharge outdoor unit installed near a wall on the heat pump performance. The design parameters considered in this study were the height of the wall close to the outdoor unit and the distance between the wall and the unit. We then investigated the performance of the outdoor unit for various placements. Based on the results of the numerical experiments, the optimum placement of the outdoor unit near the wall was established. The optimum placement of the outdoor unit showed the ratio (COP/COPref) of 1.01, whereas the worst case resulted in 0.91. (C) 2012 Elsevier B.V. All rights reserved. | en_US |
| dc.description.sponsorship | This work was supported by LG Electronics Inc. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Elsevier Science B.V., Amsterdam. | en_US |
| dc.subject | COP | en_US |
| dc.subject | Heat pump | en_US |
| dc.subject | Outdoor unit | en_US |
| dc.subject | Optimum placement | en_US |
| dc.subject | Performance | en_US |
| dc.title | Optimum placement of top discharge outdoor unit installed near a wall | en_US |
| dc.type | Article | en_US |
| dc.relation.volume | 59 | - |
| dc.identifier.doi | 10.1016/j.enbuild.2012.12.019 | - |
| dc.relation.page | 228-235 | - |
| dc.relation.journal | ENERGY AND BUILDINGS | - |
| dc.contributor.googleauthor | Ryu, Kijung | - |
| dc.contributor.googleauthor | Lee, Kwan-Soo | - |
| dc.contributor.googleauthor | Kim, Byung-Soon | - |
| dc.contributor.googleauthor | 류기정 | - |
| dc.contributor.googleauthor | 이관수 | - |
| dc.contributor.googleauthor | 김병순 | - |
| dc.relation.code | 2013002598 | - |
| dc.sector.campus | S | - |
| dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
| dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
| dc.identifier.pid | ksleehy | - |
- Appears in Collections:
- COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
- Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
