A Study on the Measurement of Volume and Surface Electrical Conductivity of Cryogenic Insulants for DC HTS Equipment

Abstract

"For the insulation design of dc high-temperature superconducting (HTS) equipment, dc electric field analysis should be performed. As the dc electric field distribution is mainly determined by the relative electrical conductivities of the various insulating materials used, the conductivities of these materials should be precisely measured. In particular, in cryogenic environment, the measurement of electrical conductivity could not be easily conducted due to the difficulty of measuring extremely low leakage current. In this paper, investigation on the measurement of volume and surface electrical conductivity of various cryogenic insulants, including polypropylene laminated paper (PPLP), Kraft, and glass fiber reinforced plastic (GFRP), was carried out. For the measurement of volume electrical conductivity in LN2, the infiltration of LN2 into the specimen should be considered in order to avoid inaccurate measuring data. Thus, in order to increase the reliability for volume electrical conductivity, the PPLP specimen deposited by copper was adopted, and the comparison between ordinary PPLP and PPLP with copper deposition was made. As a result, it was suggested that the copper deposition could be a valid method to prevent the infiltration of LN2 when the electrical conductivity of thin paper was measured. Consequently, volume and surface electrical conductivity values of PPLP, Kraft, and GFRP have been measured and summarized."