Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이세헌 | - |
dc.date.accessioned | 2018-02-08T02:01:29Z | - |
dc.date.available | 2018-02-08T02:01:29Z | - |
dc.date.issued | 2011-12 | - |
dc.identifier.citation | 한국생산제조학회지, 2011, 20(6), P.679-684(6) | en_US |
dc.identifier.issn | 1226-8097 | - |
dc.identifier.issn | 2383-4846 | - |
dc.identifier.uri | https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART001609297 | - |
dc.description.abstract | Recently, STS 301L joints of side panels to frames for stainless steel rolling stock have been made out by using existing welding methods including Resistance Spot Welding, Laser Welding and Arc Welding. Most of the processes were jointed by spot welding because it is faster at welding and comparatively less expensive for investment in welding facilities than other methods. During spot welding, however, indentation of the metal surface was made due to pressure and melting property of welding. Moreover, since the melting metal was forced to periphery of the plate as indentation was made, sheet separation, which cracked apart between jointed sheets, was carried out. A slight deformation which resulted from sheet separation deteriorated the emotional quality of railway vehicles. This paper suggests that by processing conventional spot electrode tip appropriately, melting metal is able to push up around the processed part (Hollow Spot Electrode Tip) and prevent from being dislodged from first place to periphery. Consequently, sheet separation is remarkably decreased. Also, the emotional quality of appearance of stainless steel rolling stock is enhanced considerably. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 한국생산제조시스템학회 | en_US |
dc.subject | 저항 점 용접 | en_US |
dc.subject | 중공 전극팁 | en_US |
dc.subject | 판 분리 | en_US |
dc.subject | 스테인레스 301L | en_US |
dc.subject | 로브곡선 | en_US |
dc.subject | Resistance Spot Welding | en_US |
dc.subject | Hollow Spot Electrode Tip | en_US |
dc.subject | Sheet Separation | en_US |
dc.subject | STS 301L | en_US |
dc.subject | Lobe Curve | en_US |
dc.title | 가공 전극 팁을 이용한 스테인레스 저항 용접 외판 변형 저감 | en_US |
dc.title.alternative | A Study on the Sheet Separation Reduction of Stainless Steel using Hollow Spot Electrode Tip for Resistance Spot Welding | en_US |
dc.type | Article | en_US |
dc.relation.no | 6 | - |
dc.relation.volume | 20 | - |
dc.relation.page | 679-684 | - |
dc.relation.journal | 한국생산제조시스템학회지 | - |
dc.contributor.googleauthor | 허동운 | - |
dc.contributor.googleauthor | 이세헌 | - |
dc.contributor.googleauthor | Huh, Dong-Woon | - |
dc.contributor.googleauthor | Rhee, Se-Hun | - |
dc.relation.code | 2012233195 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | srhee | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.