2015-02 | Thermal characteristics of an interior permanent magnet synchronous motor with two channel water cooling jacket | 김태현 |
2015-02 | Computing of virtual material properties for hydraulic hoses using a backward tracing scheme | 양현모 |
2015-02 | Electric Field-enhanced Aluminum induced Crystallization of Amorphous Silicon Thin Film by Constant and Stepwise Current Method | 전유림 |
2015-02 | DMA를 사용하여 섬유와 수지 특성의 실험적 묘사 | 장붕 |
2015-02 | Effect of void and moisture on mechanical behavior of composites | 축운붕 |
2015-02 | Fabrication of Nano/microstructures on Diverse Substrates for Superhydrophobicity and Anti-Corrosion | 조영준 |
2015-02 | Estimation method for the design of a driving system of 4-high mill using multivariate interpolation | 유림 |
2015-02 | CFD 해석 기법을 이용한 수 처리용 자외선 반응기 성능 예측 기법 연구 | 김현수 |
2015-02 | A New Topological Shape Optimization Method Using Artificial Bee Colony Algorithm | 김용호 |
2015-02 | CFD를 이용한 선풍기 날개의 스태킹 라인 최적 설계 | 박승환 |
2015-02 | A Study on the comparison of MWCNT mass concentration among different measurement techniques | 용상돈 |
2015-02 | A Study on the Deposition of Particles On Heated Wafers in a FOUP | 이문규 |
2015-08 | Development of a Differential Mobility Analyzer for Classifying Bipolarly Charged Particles | 송대현 |
2015-08 | 조화탐색법을 이용한 구조물의 위상 및 형상 최적화 | 이승민 |
2015-08 | 충돌 성능을 고려한 탄소섬유/유리섬유 하이브리드 복합재료 범퍼 백빔의 최적화에 관한 연구 | 윤원석 |
2015-08 | 해양온도차발전 시스템에 설치되는 복합재라이저의 피로 수명 평가 방법 | 이혁 |
2015-08 | 연료전지 촉매층 내 미세구조의 기하학적 비등방성 효과에 따른 물질전달 및 촉매활성도에 관한 연구 | 신승호 |
2015-08 | 유기태양전지 제작 공정에서의 마이크로웨이브 적용 기술 개발 | 지용천 |
2015-08 | 조립순서 제약조건을 만족하는 2대 양팔로봇의 경로계획에 관한 연구 | 이덕현 |
2015-08 | 곤충 크기의 날갯짓 초소형 비행체의 개발과 설계 방향 | 심재민 |