Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 민승재 | - |
dc.date.accessioned | 2022-12-05T05:08:53Z | - |
dc.date.available | 2022-12-05T05:08:53Z | - |
dc.date.issued | 2021-12 | - |
dc.identifier.citation | FINITE ELEMENTS IN ANALYSIS AND DESIGN, v. 197, article no. 103635, Page. 1-12 | en_US |
dc.identifier.issn | 0168-874X;1872-6925 | en_US |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S0168874X21001190?via%3Dihub | en_US |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/177936 | - |
dc.description.abstract | In this paper, a new method is presented to concurrently determine the structural layout and joint interface during the multi-material topology optimization (MMTO) process. Although the development of additive manufacturing techniques allows the fabrication of multi-material structures for soft materials with graded properties, joint materials for joining metals or composites are still needed. This paper proposes a novel material interpolation scheme for defining the joint area between dissimilar materials using a two-step filtering process. The general MMTO process is performed in the first filtering step. Furthermore, the filtered variables generate the joint area, and the filter radius controls the thickness of the area in the second filtering step. A modified discrete material optimization (DMO) approach is developed to control the different materials independently and to expand the applicability of the method to cases with more than two design materials. To demonstrate the performance of the proposed method, a compliance minimization problem is formulated for various volume constraints, joint thicknesses, material properties, mesh types, and number of materials. To show the scalability, 3-D design and compliant mechanism design examples are adopted. Based on numerical examples, it was confirmed that the proposed method performs well in various cases; moreover, the results demonstrate that the concurrent designing of the structural layout and joint interface leads to better performance than when joint stiffness is not considered. © 2021 Elsevier B.V. | en_US |
dc.description.sponsorship | This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea Government (MSIT) under Grant 2018R1A2B6003222. | en_US |
dc.language | en | en_US |
dc.publisher | ELSEVIER | en_US |
dc.subject | Joint stiffness | en_US |
dc.subject | Multi-material design | en_US |
dc.subject | Topology optimization | en_US |
dc.subject | Two-step filtering | en_US |
dc.title | Multi-material topology optimization considering joint stiffness using a two-step filtering approach | en_US |
dc.type | Article | en_US |
dc.relation.volume | 197 | - |
dc.identifier.doi | 10.1016/j.finel.2021.103635 | en_US |
dc.relation.page | 1-12 | - |
dc.relation.journal | FINITE ELEMENTS IN ANALYSIS AND DESIGN | - |
dc.contributor.googleauthor | Jung, Youngsuk | - |
dc.contributor.googleauthor | Lee, Jaewook | - |
dc.contributor.googleauthor | Min, Seungjae | - |
dc.sector.campus | S | - |
dc.sector.daehak | 공과대학 | - |
dc.sector.department | 미래자동차공학과 | - |
dc.identifier.pid | seungjae | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.