Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 육세진 | - |
dc.date.accessioned | 2022-10-27T06:04:26Z | - |
dc.date.available | 2022-10-27T06:04:26Z | - |
dc.date.issued | 2021-02 | - |
dc.identifier.citation | POWDER TECHNOLOGY, v. 379, page. 241-250 | en_US |
dc.identifier.issn | 0032-5910; 1873-328X | en_US |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S0032591020309931?via%3Dihub | en_US |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/175899 | - |
dc.description.abstract | Numerical analysis was conducted to investigate the effect of wire length, spacing between wires, and wire bending angle, which are geometric parameters of a pipe-and-spike discharge electrode, on collection efficiency. Discharge electrode shape was optimized using the Near Orthogonal Array method. When the distance between collecting plates and the number of discharge electrode wires were fixed, a longer wire length and greater distance between the wires increased the collection efficiency, which was the highest when the bending angle of the wire was 160°. Numerical results were validated through experiments. Collection efficiency of the electrostatic precipitator was increased by about 15% by the optimized discharge electrode, and power consumption and ozone generation showed little difference after optimization. Based on the results of this study, the optimization of the shape of various discharge electrodes is expected to effectively improve the collection efficiency of various types of electrostatic precipitators. | en_US |
dc.description.sponsorship | This work was supported by Basic Research Fund (NK225A) of the Korea Institute of Machinery and Materials. | en_US |
dc.language.iso | en | en_US |
dc.publisher | ELSEVIER | en_US |
dc.subject | Electrostatic precipitator; Collection efficiency; Corona discharge; Discharge electrode | en_US |
dc.title | Optimization of pipe-and-spike discharge electrode shape for improving electrostatic precipitator collection efficiency | en_US |
dc.type | Article | en_US |
dc.relation.volume | 379 | - |
dc.identifier.doi | 10.1016/j.powtec.2020.10.044 | en_US |
dc.relation.page | 241-250 | - |
dc.relation.journal | POWDER TECHNOLOGY | - |
dc.contributor.googleauthor | Lee, Gi-Hyuk | - |
dc.contributor.googleauthor | Hwang, So-Young | - |
dc.contributor.googleauthor | Cheon, Tae-Won | - |
dc.contributor.googleauthor | Kim, Hak-Joon | - |
dc.contributor.googleauthor | Han, Bangwoo | - |
dc.contributor.googleauthor | Yook, Se-Jin | - |
dc.relation.code | 2021007515 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | SCHOOL OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | ysjnuri | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.