Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 류두열 | - |
dc.date.accessioned | 2022-09-26T04:24:21Z | - |
dc.date.available | 2022-09-26T04:24:21Z | - |
dc.date.issued | 2020-12 | - |
dc.identifier.citation | POLYMERS, v. 12, no. 12, article no. 3022, page. 1-16 | en_US |
dc.identifier.issn | 2073-4360 | en_US |
dc.identifier.uri | https://www.mdpi.com/2073-4360/12/12/3022 | en_US |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/173857 | - |
dc.description.abstract | This study evaluates the tensile properties, including the tensile strength and elongation at break, and dynamic behavior, including shock absorption and vertical deformation, of an elastic rubber layer in synthetic sports surfaces produced using waste tire chips containing styrene-butadiene rubber (SBR). The primary variables of the investigation were the number of compactions, resin-rubber granule ratio, and curing conditions, such as aging, the temperature, and the relative humidity. The test results showed an increase in the tensile strength of the elastic rubber layer with recycled SBR as the number of compactions, resin-rubber granule ratio, curing period, and temperature increased, while the elongation at break was affected by the curing temperature and period. Shock absorption and vertical deformation decreased with an increasing resin-rubber granule ratio and number of compactions due to the increased hardness. However, these properties were not significantly affected by the curing conditions. Furthermore, the test results indicated that the curing temperature has a pronounced effect on the tensile properties of the elastic rubber layer, and maintaining the appropriate curing temperature-approximately 50 degrees C-is a possible solution for improving the relatively low tensile properties of the elastic rubber layer. | en_US |
dc.description.sponsorship | This research was funded by a grant (20CTAP-C152012-02) from the Technology Advancement Research Program (TARP) funded by the Ministry of Land, Infrastructure and Transport of the Korean government, and also supported by the research fund of Chungnam National University. | en_US |
dc.language.iso | en | en_US |
dc.publisher | MDPI | en_US |
dc.subject | synthetic sports surface; elastic rubber layer; styrene-butadiene rubber; tensile properties; shock absorption; vertical deformation | en_US |
dc.title | Mechanical and Dynamic Behavior of an Elastic Rubber Layer with Recycled Styrene-Butadiene Rubber Granules | en_US |
dc.type | Article | en_US |
dc.relation.no | 12 | - |
dc.relation.volume | 12 | - |
dc.identifier.doi | 10.3390/polym12123022 | en_US |
dc.relation.page | 1-16 | - |
dc.relation.journal | POLYMERS | - |
dc.contributor.googleauthor | Kim, Seongdo | - |
dc.contributor.googleauthor | Shin, Hyun-Oh | - |
dc.contributor.googleauthor | Yoo, Doo-Yeol | - |
dc.relation.code | 2020051252 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | SCHOOL OF ARCHITECTURAL ENGINEERING | - |
dc.identifier.pid | dyyoo | - |
dc.identifier.researcherID | AAR-4284-2020 | - |
dc.identifier.orcid | https://orcid.org/0000-0003-2814-5482 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.