Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 전형탁 | - |
dc.date.accessioned | 2022-09-05T01:06:19Z | - |
dc.date.available | 2022-09-05T01:06:19Z | - |
dc.date.issued | 2020-11 | - |
dc.identifier.citation | JOURNAL OF ALLOYS AND COMPOUNDS, v. 857, article no. 157931, page. 1-6 | en_US |
dc.identifier.issn | 0925-8388 | - |
dc.identifier.issn | 1873-4669 | - |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S092583882034295X?via%3Dihub | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/172750 | - |
dc.description.abstract | We investigated the deposition of titanium dioxide (TiO2) thin films. TiO2 thin films were deposited using flow-type atomic layer deposition (ALD) and the new MAP Ti (C12H23N3Ti) precursor and deionized water (DI) as a reactant. For the deposition of TiO2 thin films using the new Ti precursor and DI, the ALD window was between 250 degrees C and 275 degrees C, which is lower than the ALD window using conventional metal organic Ti precursors. X-ray photoelectron spectroscopy (XPS) analysis showed that the Ti:O ratio was about 1:1.8. Additionally, there were almost no impurities in the thin film, confirming that TiO2 thin film was deposited with the proposed method. After heat treatment of thin films in the range of 400 degrees C-800 degrees C, X-ray diffraction (XRD) measurements were conducted. When the heat treatment was performed at 700 degrees C, a mixed anatase and rutile phase appeared. However, when the heat treatment was done at 800 degrees C, the anatase phase disappeared and only the rutile phase was obtained. Based on C-V and I-V analyses, dielectric constant values from 32 to 94 were obtained as the heat treatment temperature increased. Additionally, the leakage current was 10(-5) A/cm(2), which is superior to previously reported TiO2 thin films. | en_US |
dc.description.sponsorship | This study was supported by a Mecaro's University R&D program [202000000002226]. | en_US |
dc.language.iso | en | en_US |
dc.publisher | ELSEVIER SCIENCE SA | en_US |
dc.subject | Titanium dioxide | en_US |
dc.subject | Atomic layer deposition | en_US |
dc.subject | Metal organic precursor | en_US |
dc.subject | High-k | en_US |
dc.subject | Leakage current | en_US |
dc.title | Atomic layer deposition of titanium dioxide films using a metal organic precursor (C12H23N3Ti) and H2O (DI water) | en_US |
dc.type | Article | en_US |
dc.relation.volume | 857 | - |
dc.identifier.doi | 10.1016/j.jallcom.2020.157931 | - |
dc.relation.page | 1-6 | - |
dc.relation.journal | JOURNAL OF ALLOYS AND COMPOUNDS | - |
dc.contributor.googleauthor | Kim, Byunguk | - |
dc.contributor.googleauthor | Lee, Namgue | - |
dc.contributor.googleauthor | Park, Suhyeon | - |
dc.contributor.googleauthor | Park, Taehun | - |
dc.contributor.googleauthor | Song, Jaiwon | - |
dc.contributor.googleauthor | Han, Seungwook | - |
dc.contributor.googleauthor | Park, Hyunwoo | - |
dc.contributor.googleauthor | Lee, Dahyun | - |
dc.contributor.googleauthor | Kim, Hohoon | - |
dc.contributor.googleauthor | Jeon, Hyeongtag | - |
dc.relation.code | 2020047954 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | SCHOOL OF MATERIALS SCIENCE AND ENGINEERING | - |
dc.identifier.pid | hjeon | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.