Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 장승환 | - |
dc.date.accessioned | 2021-07-22T05:16:00Z | - |
dc.date.available | 2021-07-22T05:16:00Z | - |
dc.date.issued | 2020-03 | - |
dc.identifier.citation | Applied Science and Engineering Progress, v. 13, no. 2, page. 127-135 | en_US |
dc.identifier.uri | https://ph02.tci-thaijo.org/index.php/ijast/article/view/240598 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/163062 | - |
dc.description.abstract | This paper focuses on showing the effect of curing time on the bond strength between reinforcement and fly-ash geopolymer concrete. Various parameters are varied to compare between ordinary Portland cement (OPC) concrete and Class C fly-ash geopolymer concrete (GPC). These concretes are designed to have two different compressive strengths, and each of them is cured at 28 and 56 days. The diameter of reinforcement is selected as 12 and 16 mm with deformed type. From the study, it is found that the bond strength increase with increasing the compressive strength, while with decreasing the diameter of reinforcement, as expected. The bond strength of OPC embedded with smaller reinforcement is more sensitive to the increase of the curing time. However, its bond strength is significantly less sensitive to the compressive strength. The bond strength of GPC with higher design compressive strength is more sensitive to the increase of the curing time. However, its bond strength is significantly less sensitive to the diameter of reinforcement. | en_US |
dc.description.sponsorship | This work was supported by King Mongkut’s University of Technology North Bangkok, and Thailand Research Fund (TRF) under the TRF Research Career Development Grant Contract No. RSA6080049. The author would also like to acknowledge students for preparing the experiment. | en_US |
dc.language.iso | en_US | en_US |
dc.publisher | King Mongkut’s University of Technology North Bangkok | en_US |
dc.subject | Curing time | en_US |
dc.subject | Fly-ash based geopolymer | en_US |
dc.subject | Concrete | en_US |
dc.subject | Deformed bar | en_US |
dc.subject | Bond strength | en_US |
dc.title | Effect of curing time on bond strength between reinforcement and fly-ash geopolymer concrete | en_US |
dc.type | Article | en_US |
dc.relation.no | 2 | - |
dc.relation.volume | 13 | - |
dc.identifier.doi | 10.14416/j.asep.2020.03.006 | - |
dc.relation.page | 127-135 | - |
dc.contributor.googleauthor | Petcherdchoo, Aruz | - |
dc.contributor.googleauthor | Hongubon, Tawan | - |
dc.contributor.googleauthor | Thanasisathit, Nattawut | - |
dc.contributor.googleauthor | Punthutaecha, Koonnamas | - |
dc.contributor.googleauthor | Jang, Sung-Hwan | - |
dc.sector.campus | E | - |
dc.sector.daehak | COLLEGE OF ENGINEERING SCIENCES[E] | - |
dc.sector.department | DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING | - |
dc.identifier.pid | sj2527 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.