Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 조진수 | - |
dc.date.accessioned | 2021-03-29T06:23:07Z | - |
dc.date.available | 2021-03-29T06:23:07Z | - |
dc.date.issued | 2020-01 | - |
dc.identifier.citation | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v. 34, no. 1, page. 165-173 | en_US |
dc.identifier.issn | 1738-494X | - |
dc.identifier.issn | 1976-3824 | - |
dc.identifier.uri | https://link.springer.com/article/10.1007%2Fs12206-019-1218-9 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/160929 | - |
dc.description.abstract | A computational analysis tool was used to characterize the flow structure in an S-shaped intake to determine the relationship between inlet shape and angle of incidence and to study the reduction of flow distortion on the engine face. A Royal Aircraft Establishment M 2129 S-shaped intake was used to establish the reliability of the proposed computational analysis technique. On the basis of previous research, the k-omega shear stress transport model for turbulence was used, and reliable results were obtained for complex flow structures, such as the secondary flow caused by adverse pressure gradient. The size of owl face separation and the angle of incidence at which the separation occurred differed according to the relation between the angle of incidence of the flow and the inlet shape. The size of the owl face separation was small in the S-shaped intake with an inlet shape close to that of an upper semicircle. Flow separation was delayed with respect to the angle of incidence. | en_US |
dc.language.iso | en | en_US |
dc.publisher | KOREAN SOC MECHANICAL ENGINEERS | en_US |
dc.subject | CFD analysis | en_US |
dc.subject | Counter-rotating vortex | en_US |
dc.subject | Distortion cefficient | en_US |
dc.subject | Inlet shape | en_US |
dc.subject | Angle of incidence | en_US |
dc.subject | S-shaped intake | en_US |
dc.subject | Uniform flow index | en_US |
dc.title | Combined effects of inlet shape and angle of incidence on flow uniformity in a subsonic diffusing S-shaped intake | en_US |
dc.type | Article | en_US |
dc.relation.no | 1 | - |
dc.relation.volume | 34 | - |
dc.identifier.doi | 10.1007/s12206-019-1218-9 | - |
dc.relation.page | 165-173 | - |
dc.relation.journal | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.contributor.googleauthor | Lee, Jihyeong | - |
dc.contributor.googleauthor | Cho, Jinsoo | - |
dc.relation.code | 2020051709 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | jscho | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.