Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최낙삼 | - |
dc.date.accessioned | 2021-01-08T01:52:42Z | - |
dc.date.available | 2021-01-08T01:52:42Z | - |
dc.date.issued | 2002-03 | - |
dc.identifier.citation | 한국자동차공학회 논문집, v. 10, no. 3, page. 130-135 | en_US |
dc.identifier.issn | 1225-6382 | - |
dc.identifier.issn | 2234-0149 | - |
dc.identifier.uri | http://koreascience.or.kr/article/JAKO200211921028655.page | - |
dc.identifier.uri | http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE00525127 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/156733 | - |
dc.description.abstract | This study investigates the effect of curing method on the bonding strength of aluminum/CFRP composites. The surface of aluminum panel was treated by DC plasma. Lap shear tests and T-peel tests were performed based on the procedure of ASTM 906-94a and ASTM D 1876-95, respectively. Test samples were fabricated by using the co-curing method and the secondary curing method. The results showed that the shear strength of test sam­ples made by the co-curing method was 2.5 times greater than that of test samples made by the secondary curing method. The T -peel strength of the co-curing method case was almost 2 times greater than that of the secondary curing method case. | en_US |
dc.description.sponsorship | 본 연구는 한국과학재단 목적기초연구과제(과제번호: 2000-1-30400-004-3)에 의하여 연구되었으며 이에 사의를 표합니다. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 한국자동차공학회 | en_US |
dc.subject | DC plasma | en_US |
dc.subject | T-peel strength | en_US |
dc.subject | Single lap shear specimen | en_US |
dc.subject | Adhesive bonding | en_US |
dc.subject | Composite patch | en_US |
dc.subject | Co-curing method | en_US |
dc.subject | Secondary curing method | en_US |
dc.subject | DC 플라즈마 | en_US |
dc.subject | T-peel 강도 | en_US |
dc.subject | 단일랩 전단 시편 | en_US |
dc.subject | 접착제 본딩 | en_US |
dc.subject | 복합재 패치 | en_US |
dc.subject | 동시경화법 | en_US |
dc.subject | 이차경화법 | en_US |
dc.title | 알루미늄/CFRP 복합재의 접착강도 향상을 위한 경화방법에 관한 연구 | en_US |
dc.title.alternative | A Study on the Curing Method to Improve Bonding Strength of Aluminum/CFRP Composites | en_US |
dc.type | Article | en_US |
dc.relation.journal | 한국자동차공학회 논문집 | - |
dc.contributor.googleauthor | 이경엽 | - |
dc.contributor.googleauthor | 양준호 | - |
dc.contributor.googleauthor | 최낙삼 | - |
dc.relation.code | 2012210715 | - |
dc.sector.campus | E | - |
dc.sector.daehak | COLLEGE OF ENGINEERING SCIENCES[E] | - |
dc.sector.department | DEPARTMENT OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | nschoi | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.