Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최낙삼 | - |
dc.date.accessioned | 2020-07-28T07:19:24Z | - |
dc.date.available | 2020-07-28T07:19:24Z | - |
dc.date.issued | 2004-12-15 | - |
dc.identifier.citation | Materials Science and Engineering, v. 387–389, Page. 887-891 | en_US |
dc.identifier.issn | 0921-5093 | - |
dc.identifier.uri | https://information.hanyang.ac.kr/#/eds/detail?an=edselc.2-52.0-10444265217&dbId=edselc | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/151934 | - |
dc.description.abstract | Vacuum hot pressing has been used for the development of Ti–MMCs using foil–fiber–foil bundles, and a unified micro-mechanical model has been presented to determine the densification behavior. The effects of process conditions on the consolidation, together with microstructural evolution of the materials, have been investigated. As a result either increasing temperature or pressure leads to increasing densification rate but the conditions should be determined by the precisely controlled geometrical arrangement that is related to the heterogeneous microstructures. The experimentally measured microstructural changes have shown that both grain growth and refinement occurs during the process, and their effect on densification have been analyzed by means of two types of possible mechanisms including grain growth kinetics and dynamic recrystallization. | en_US |
dc.description.sponsorship | This work was supported by grant no. (R01-2000-000-00294-0) from the Basic Research Program of the Korea Science & Engineering Foundation. The authors would like to thank for their support. | en_US |
dc.language.iso | en_US | en_US |
dc.publisher | ELSEVIER SCIENCE SA | en_US |
dc.subject | Densification behavior | en_US |
dc.subject | Metal matrix composites (MMCs) | en_US |
dc.subject | Microstructural evolution | en_US |
dc.subject | Porosity | en_US |
dc.title | Microstructural influences on consolidation behavior of titanium metal matrix composites | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1016/j.msea.2003.12.091 | - |
dc.relation.journal | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES | - |
dc.contributor.googleauthor | Kim, T.-W. | - |
dc.contributor.googleauthor | Choi, N.S. | - |
dc.relation.code | 2012206492 | - |
dc.sector.campus | E | - |
dc.sector.daehak | COLLEGE OF ENGINEERING SCIENCES[E] | - |
dc.sector.department | DEPARTMENT OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | nschoi | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.