Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 최동호 | - |
dc.date.accessioned | 2019-11-20T21:34:30Z | - |
dc.date.available | 2019-11-20T21:34:30Z | - |
dc.date.issued | 2017-02 | - |
dc.identifier.citation | 한국강구조학회 논문집, v. 29, no. 1, page. 1-12 | en_US |
dc.identifier.issn | 1226-363X | - |
dc.identifier.issn | 2287-4054 | - |
dc.identifier.uri | http://koreascience.or.kr/article/JAKO201718851431709.page | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/112875 | - |
dc.description.abstract | 본 연구에는 HSB600 고강도 강재의 변형-경화를 고려한 조밀 강합성 I-거더의 정모멘트부 공칭휨강도를 제안한다. HSB600은일반강재와는 다르게 명확한 항복 고원을 보이지 않고 항복 직후 변형-경화가 진행된다. 하지만 현 국내외 설계기준에 있는 공칭휨강도 식은일반강재에 대하여 개발된 설계식이기 때문에 HSB600의 변형-경화 특성을 제대로 반영하지 못하고 있다. 따라서 HSB600의 변형-경화 특성이 휨강도에 미치는 영향을 고려하기 위해, 강합성 거더의 변형-경화를 고려한 소성모멘트를 제안한 후 다수의 해석단면을 대상으로 모멘트-곡률 수치해석을 수행하였다. 해석 결과를 토대로 HSB600 고강도 강재의 변형-경화가 강합성 거더 휨강도에 미치는 영향을 나타내는매개변수를 제안하였다. 또한 이 매개변수를 이용하여 HSB600 강합성 거더의 변형-경화를 고려한 정모멘트부 공칭휨강도를 제안하였고현 AASHTO LRFD 교량설계기준의 공칭휨강도와 비교 검토하였다.This paper proposes nominal flexural strength considering strain-hardening effect of HSB600 high performance steel for compact composite I-girders in positive bending. Unlike conventional steels, HSB600 undergoes strain-hardening just after yielding without going through yield plateau. However, because the nominal flexural strength specified in domestic and foreign bridge design specifications has been developed for the conventional steel composite girders, the nominal flexural strength does not appropriately consider the strain-hardening of HSB600. Therefore, plastic moment considering a strain-hardening is proposed so as to consider effect of the strain-hardening of HSB600 on flexural strength and then moment-curvature analysis is performed to a wide range of cross-sections. From results of the analysis, a parameter representing the effect of the strain-hardening on the flexural strength of HSB600 composite girders is proposed. Furthermore, by using this parameter, the nominal flexural strength considering the strain-hardening effect for HSB600 composite I-girders in positive bending is proposed and then evaluated by comparing with the current AASHTO LRFD bridge design specifications. | en_US |
dc.description.sponsorship | 본 연구는 한국연구재단을 통하여 지원된 교육부 이공학개인기초연구지원사업(NRF-2015R1D1A1A09060113)에의하여 수행되었습니다. 연구 지원에 감사드립니다. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 한국강구조학회 | en_US |
dc.subject | 변형-경화 | en_US |
dc.subject | 고성능 강재 | en_US |
dc.subject | HSB600 | en_US |
dc.subject | 강합성 I-거더 | en_US |
dc.subject | 정모멘트부 | en_US |
dc.subject | 공칭휨강도 | en_US |
dc.subject | Strain-hardening | en_US |
dc.subject | High performance steel | en_US |
dc.subject | HSB600 | en_US |
dc.subject | Composite I-girder | en_US |
dc.subject | Positive bending | en_US |
dc.subject | Nominal flexural strength | en_US |
dc.title | HSB600 강재의 변형-경화를 고려한 강합성 I-거더의정모멘트부 공칭휨강도 | en_US |
dc.title.alternative | Nominal Flexural Strength Considering Strain-hardening Effect of HSB600 Steel for Composite I-girders in Positive Bending | en_US |
dc.type | Article | en_US |
dc.relation.no | 1 | - |
dc.relation.volume | 29 | - |
dc.identifier.doi | 10.7781/kjoss.2017.29.1.001 | - |
dc.identifier.doi | 10.7781/kjoss.2017.29.1.013 | - |
dc.relation.page | 1-12 | - |
dc.relation.journal | 한국강구조학회 논문집 | - |
dc.contributor.googleauthor | 임지훈 | - |
dc.contributor.googleauthor | 최동호 | - |
dc.contributor.googleauthor | Lim, Ji Hoon | - |
dc.contributor.googleauthor | Choi, Dong Ho | - |
dc.relation.code | 2017019139 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING | - |
dc.identifier.pid | samga | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.