Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이세헌 | - |
dc.date.accessioned | 2019-03-26T06:16:27Z | - |
dc.date.available | 2019-03-26T06:16:27Z | - |
dc.date.issued | 2016-11 | - |
dc.identifier.citation | IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v. 6, NO. 11, Page. 1677-1686 | en_US |
dc.identifier.issn | 2156-3950 | - |
dc.identifier.issn | 2156-3985 | - |
dc.identifier.uri | https://ieeexplore.ieee.org/document/7592437 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/101203 | - |
dc.description.abstract | This paper proposes practical design guidelines for roll-to-roll (R2R) slot-die coating equipment with a precision mechanism enabling high-accuracy coating performance. The equipment is developed for specially fabricating organic photovoltaic devices. An R2R transportation module (capable of unwinding, in-feeding, out-feeding, and rewinding), a slot-die coating module, a far-infrared drying module, and a cleanliness control module are incorporated into the equipment. When used to apply an organic solution, the developed equipment can provide an operating tension of 2.3%-11.3%, a coating velocity of 2-7 m/min, a coating thickness of 28-95 nm, a uniformity of 8%-23%, and a roughness of 2.86-7.71 nm. A review of this equipment on the basis of theoretical and experimental approaches is included in the detailed equipment specifications and design guidelines for R2R slot-die coating machines. | en_US |
dc.description.sponsorship | This paper was written as part of Konkuk University's research support program for its faculty on sabbatical leave in 2011. | en_US |
dc.language.iso | en | en_US |
dc.publisher | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC | en_US |
dc.subject | Roll-to-roll (R2R) | en_US |
dc.subject | slot-die coating | en_US |
dc.subject | tension control | en_US |
dc.title | Practical Design Guidelines for the Development of High-Precision Roll-to-Roll Slot-Die Coating Equipment and the Process | en_US |
dc.type | Article | en_US |
dc.relation.no | 11 | - |
dc.relation.volume | 6 | - |
dc.identifier.doi | 10.1109/TCPMT.2016.2613141 | - |
dc.relation.page | 1677-1686 | - |
dc.relation.journal | IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY | - |
dc.contributor.googleauthor | Seong, Jinwoo | - |
dc.contributor.googleauthor | Park, Janghoon | - |
dc.contributor.googleauthor | Lee, Jongsu | - |
dc.contributor.googleauthor | Ahn, Byoungjoon | - |
dc.contributor.googleauthor | Yeom, Joong Hyun | - |
dc.contributor.googleauthor | Kim, Jaemin | - |
dc.contributor.googleauthor | Hassinen, Tomi | - |
dc.contributor.googleauthor | Rhee, Sehun | - |
dc.contributor.googleauthor | Ko, Sunglim | - |
dc.contributor.googleauthor | Lee, Dongjin | - |
dc.relation.code | 2016003029 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | srhee | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.