Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김영도 | - |
dc.date.accessioned | 2018-08-24T07:59:15Z | - |
dc.date.available | 2018-08-24T07:59:15Z | - |
dc.date.issued | 2016-07 | - |
dc.identifier.citation | Korean Journal of Materials Research (2016), v. 26, NO. 7, Page. 376-381 | en_US |
dc.identifier.issn | 1225-0562 | - |
dc.identifier.issn | 2287-7258 | - |
dc.identifier.uri | http://journal.mrs-k.or.kr/journal/article.php?code=43647 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/74513 | - |
dc.description.abstract | For the development of a low-melting point filler metal for brazing aluminum alloy, we analyzed change of melting point and wettability with addition of Sn into Al-20Cu-10Si filler metal. DSC results showed that the addition of 5 wt% Sn into the Al-20Cu-10Si filler metal caused its liquidus temperature to decrease by about 30 °C. In the wettability test, spread area of melted Al-Cu-Si-Sn alloy is increased through the addition of Sn from 1 to 5 wt%. For the measuring of the mechanical properties of the joint region, Al 3003 plate is brazed by Al-20Cu-10Si-5Sn filler metal and the mechanical property is measured by tensile test. The results showed that the tensile strength of the joint region is higher than the tensile strength of Al 3003. Thus, failure occurred in the Al 3003 plate. | en_US |
dc.description.sponsorship | This work was supported by the Technological Innovation R&D Program(S2161336) funded by the Small and Medium Business Administration(SMBA, Korea). This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education (2016-R1A6A1A03013422). | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | Materials Research Society of Korea | en_US |
dc.subject | brazing | en_US |
dc.subject | aluminum alloy | en_US |
dc.subject | bonding technology | en_US |
dc.subject | melting point | en_US |
dc.title | 저온 브레이징용 Al-Si-Cu 합금의 Sn 첨가에 따른 융점 및 기계적 특성 변화 연구 | en_US |
dc.title.alternative | Effect of tin addition on the melting temperatures and mechanical properties of Al-Si-Cu brazing filler metals | en_US |
dc.type | Article | en_US |
dc.relation.no | 7 | - |
dc.relation.volume | 26 | - |
dc.identifier.doi | 10.3740/MRSK.2016.26.7.376 | - |
dc.relation.page | 376-381 | - |
dc.relation.journal | Korean Journal of Materials Research | - |
dc.contributor.googleauthor | 김민상 | - |
dc.contributor.googleauthor | 박천웅 | - |
dc.contributor.googleauthor | 변종민 | - |
dc.contributor.googleauthor | 김영도 | - |
dc.contributor.googleauthor | Kim, Min Sang | - |
dc.contributor.googleauthor | Park, Chun Woong | - |
dc.contributor.googleauthor | Byun, Jong Min | - |
dc.contributor.googleauthor | Kim, Young Do | - |
dc.relation.code | 2016034074 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MATERIALS SCIENCE AND ENGINEERING | - |
dc.identifier.pid | ydkim1 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.