Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 정규선 | - |
dc.date.accessioned | 2018-07-26T06:51:44Z | - |
dc.date.available | 2018-07-26T06:51:44Z | - |
dc.date.issued | 2013-07 | - |
dc.identifier.citation | JOURNAL OF NUCLEAR MATERIALS, 권: 438, 호: 2013, 페이지: S953-S958 | en_US |
dc.identifier.issn | 0022-3115 | - |
dc.identifier.issn | 1873-4820 | - |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S0022311513002158?via%3Dihub | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/73139 | - |
dc.description.abstract | A capacitive diaphragm gauge (CDG) has been modified to measure the amount of accumulated in-vessel dust in tokamaks. In order to pin point the mass load on the CDG, aluminum dish is used. Calibrations show that the CDG has a measurement range from 2.2 g to 6.7 g with a minimum detection mass of 30 mg. Long term stability of measured signal is obtained at least more than 12 h operation with the atmospheric pressure and under vacuum. The CDG will be installed in KSTAR (Korea Superconducting Tokamak Advanced Research) device in 2012 campaign to measure the amount of in-vessel dusts. (C) 2013 Elsevier B.V. All rights reserved. | en_US |
dc.description.sponsorship | This research was supported by National R&D Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (MEST) (20090082669). It was partially supported by the Basic Research Program of the National Fusion Research Institute (NFRI) Korea and by the BK21 program under Korea MEST. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier Science B.V., Amsterdam. | en_US |
dc.title | Characterization and calibration of a capacitive diaphragm gauge manometer for the measurement of dust particles in vacuum | en_US |
dc.type | Article | en_US |
dc.relation.volume | 438 | - |
dc.identifier.doi | 10.1016/j.jnucmat.2013.01.207 | - |
dc.relation.page | 953-958 | - |
dc.relation.journal | JOURNAL OF NUCLEAR MATERIALS | - |
dc.contributor.googleauthor | Cho, S. G. | - |
dc.contributor.googleauthor | Hong, S. H. | - |
dc.contributor.googleauthor | Woo, H. J. | - |
dc.contributor.googleauthor | Park, S. J. | - |
dc.contributor.googleauthor | Park, E. K. | - |
dc.contributor.googleauthor | Oh, Y. S. | - |
dc.contributor.googleauthor | Kim, J. W. | - |
dc.contributor.googleauthor | Chung, K. S. | - |
dc.relation.code | 2013010861 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF ELECTRICAL AND BIOMEDICAL ENGINEERING | - |
dc.identifier.pid | kschung | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.