291 0

Full metadata record

DC FieldValueLanguage
dc.contributor.author박성욱-
dc.date.accessioned2018-04-19T07:03:14Z-
dc.date.available2018-04-19T07:03:14Z-
dc.date.issued2012-03-
dc.identifier.citationJournal of Automobile Engineering, 2012, 226(3), P.410-418en_US
dc.identifier.issn0954-4070-
dc.identifier.urihttp://journals.sagepub.com/doi/abs/10.1177/0954407011417048?journalCode=pidb-
dc.identifier.urihttps://repository.hanyang.ac.kr/handle/20.500.11754/69437-
dc.description.abstractThis study describes the effects of diesel–biodiesel–bioethanol blending fuels on the combustion and emission characteristics of a compression ignition engine. The experiments were investigated for various blending ratios and various fuel injection parameters. In this study, biodiesel fuel was blended not only to prevent phase separation between bioethanol and diesel but also to compensate for the low viscosity of bioethanol. The bioethanol blending ratio is restricted up to 30 vol. % to maintain the ignition characteristics. The results showed that the ignition delay was extended and that the fuel consumption and the maximum rate of pressure rise deteriorated with increasing bioethanol blending ratio. In addition, the diesel–biodiesel–bioethanol fuel reduced the indicated specific soot emissions. As the bioethanol blending ratio is increased, the indicated specific carbon monoxide (CO), the indicated specific unburned hydrocarbon, and the indicated specific nitrogen oxide emissions increased slightly.en_US
dc.description.sponsorshipThis work was supported in part by the Center for Environmentally Friendly Vehicles of the Eco-STAR project of the Ministry of the Environment in Seoul, Republic of Korea, and by the Second Brain Korea 21 project.en_US
dc.language.isoenen_US
dc.publisherSAGE Publications LTDen_US
dc.subjectbiodieselen_US
dc.subjectbioethanolen_US
dc.subjectemission characteristicsen_US
dc.subjectindicated specific fuel consumptionen_US
dc.titleA study of the effects of diesel-biodiesel-bioethanol fuels on emission reduction in a compression ignition engineen_US
dc.typeArticleen_US
dc.relation.noD3-
dc.relation.volume226-
dc.identifier.doi10.1177/0954407011417048-
dc.relation.page410-418-
dc.relation.journalPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING-
dc.contributor.googleauthorLee, D.-
dc.contributor.googleauthorRoh, H.G.-
dc.contributor.googleauthorPark, S.-
dc.contributor.googleauthorLee, C.S.-
dc.relation.code2012214167-
dc.sector.campusS-
dc.sector.daehakCOLLEGE OF ENGINEERING[S]-
dc.sector.departmentDIVISION OF MECHANICAL ENGINEERING-
dc.identifier.pidparks-
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE