2018-11 | Activation energy for plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A high temperature nanoindentation study | 장재일 |
2017-11 | Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis | 장재일 |
2014-05 | Assessment of Surface-local Strains from Remnant Microindents on a Zr-based Metallic Glass | 장재일 |
2021-01 | Bimodality of incipient plastic strength in face-centered cubic high-entropy alloys | 장재일 |
2011-12 | Bluntness measurement of a Berkovich indenter | 장재일 |
2019-07 | Bulk-State Reactions and Improving the Mechanical Properties of Metals through High-Pressure Torsion | 장재일 |
2012-05 | Correlation of particle impact conditions with bonding, nanocrystal formation and mechanical properties in kinetic sprayed nickel | 장재일 |
2017-11 | Critical bending radius of thin single-crystalline silicon with dome and pyramid surface texturing | 장재일 |
2016-12 | Decoupling the contributions of constituent layers to the strength and ductility of a multi-layered steel | 장재일 |
2022-03 | Decoupling the roles of constituent phases in the strengthening of hydrogenated nanocrystalline dual-phase high-entropy alloys | 장재일 |
2017-07 | Defect structure and hardness in nanocrystalline CoCrFeMnNi High-Entropy Alloy processed by High-Pressure Torsion | 장재일 |
2021-09 | Design of V-Substituted TiFe-Based Alloy for Target Pressure Range and Easy Activation | 장재일 |
2018-11 | Direct Bonding of Aluminum-Copper Metals through High-Pressure Torsion Processing | 장재일 |
2020-08 | Direct nanofluidic channels via hardening and wrinkling of thin polymer films | 장재일 |
2020-04 | Effect of grain size on the strain rate sensitivity of CoCrFeNi high-entropy alloy | 장재일 |
2014-10 | Effect of hydrogen on the yielding behavior and shear transformation zone volume in metallic glass ribbons | 장재일 |
2018-08 | Effects of interfacial layer-by-layer nanolayers on the stability of the Cu TSV:Diffusion barrier, adhesion, conformal coating, and mechanical property | 장재일 |
2015-01 | Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion | 장재일 |
2011-08 | Estimating the stress exponent of nanocrystalline nickel: Sharp vs. spherical indentation | 장재일 |
2014-09 | Estimation of the Hall-Petch strengthening coefficient of steels through nanoindentation | 장재일 |
2012-06 | Estimation of the shear transformation zone size fin a bulk metallic glass through statistical a analysis of the first pop-in stresses during spherical nanoindentation | 장재일 |
2014-03 | Evolution of plasticity, strain-rate sensitivity and the underlying deformation mechanism in Zn-22% Al during high-pressure torsion | 장재일 |
2012-07 | Experimental Analysis of the Elastic-Plastic Transition During Nanoindentation of Single Crystal Alpha-Silicon Nitride | 장재일 |
2011-01 | Exploring Nanomechanical Behavior of Silicon Nanowires: AFM Bending Versus Nanoindentation | 장재일 |
2018-09 | Fabrication of nanocomposites through diffusion bonding under high-pressure torsion | 장재일 |
2012-05 | Further evidence for room temperature, indentation-induced nanocrystallization in a bulk metallic glass | 장재일 |
2021-05 | Hierarchical refinement of primary phases in a multicomponent Al-14Si-CuNiMg casting alloy by ultrasonic melt treatment | 장재일 |
2014-11 | High-cycle fatigue behavior of Zn-22% Al alloy processed by high-pressure torsion | 장재일 |
2021-03 | Hydrogen uptake and its influence in selective laser melted austenitic stainless steel: A nanoindentation study | 장재일 |
2014-12 | Hydrogen-induced hardening and softening of Ni-Nb-Zr amorphous alloys: Dependence on the Zr content | 장재일 |