Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 조용식 | - |
dc.date.accessioned | 2018-03-12T08:32:16Z | - |
dc.date.available | 2018-03-12T08:32:16Z | - |
dc.date.issued | 2013-06 | - |
dc.identifier.citation | COASTAL ENGINEERING, 2013, 76, P.55-67 | en_US |
dc.identifier.issn | 0378-3839 | - |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S0378383913000264?via%3Dihub | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/45568 | - |
dc.description.abstract | Due to their capability of correctly representing wave characteristics, the number of numerical models based on Navier-Stokes equation (NSE) models has recently increased remarkably. One of the key challenges of this type of wave model, however, is to minimize the wave re-reflection from the incident boundary. Many numerical techniques have been developed to deal with this problem, and previous studies have reported on internal wave makers that employ NSE. Research on generation and transformation of irregular waves using a three-dimensional NSE model, however, has begun very recently, and few studies have yet been reported. In this study, a three-dimensional numerical model was applied to generate irregular waves, and transformation of irregular waves was simulated in a numerical wave tank. The model was first verified by applying it to simple numerical tests in two dimensions. The model was then used to generate directional monochromatic and irregular waves in three dimensions. The numerical results were compared with the analytical solutions, and good agreement was observed. Finally, the model was applied to simulate the transformation of irregular waves over an uneven bottom geometry in a wave tank. (C) 2013 Elsevier B.V. All rights reserved. | en_US |
dc.description.sponsorship | This work was supported by the Korea Institute of Ocean Science & Technology (Grants: PE98913 and PE98916). The Corresponding Author was financially supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MEST) (No. 2011-0015386). The second author acknowledges support by the Natural Science Foundation of P.R. China (51061130547). | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier Science B.V., Amsterdam, Netherlands | en_US |
dc.subject | Internal wave maker | en_US |
dc.subject | Navier-Stokes equations | en_US |
dc.subject | L-shaped wave maker | en_US |
dc.subject | Momentum source functions | en_US |
dc.subject | Irregular wave | en_US |
dc.title | Generation of 3D regular and irregular waves using Navier-Stokes equations model with an internal wave maker | en_US |
dc.type | Article | en_US |
dc.relation.volume | 76 | - |
dc.identifier.doi | 10.1016/j.coastaleng.2013.01.013 | - |
dc.relation.page | 55-67 | - |
dc.relation.journal | COASTAL ENGINEERING | - |
dc.contributor.googleauthor | Ha, Taemin | - |
dc.contributor.googleauthor | Lin, Pengzhi | - |
dc.contributor.googleauthor | Cho, Yong-Sik | - |
dc.relation.code | 2013009492 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING | - |
dc.identifier.pid | ysc59 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.