Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박성욱 | - |
dc.date.accessioned | 2022-11-25T00:32:23Z | - |
dc.date.available | 2022-11-25T00:32:23Z | - |
dc.date.issued | 2022-09 | - |
dc.identifier.citation | 한국분무공학회지, v. 27, NO. 3, Page. 161-166 | en_US |
dc.identifier.issn | 1226-2277 | en_US |
dc.identifier.uri | http://koreascience.or.kr/article/JAKO202228453809650.page | en_US |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/177431 | - |
dc.description.abstract | To measure the change in friction loss due to the control of fuel mass and oil temperature in a gasoline engine, the floating liner method was used to measure the friction generated by the piston of a single-cylinder engine. First, to check the effect of combustion pressure on friction, the friction loss was measured by adjusting the fuel mass. It was confirmed that the friction loss increased as the fuel mass increased under the same lubrication conditions. In addition, it was confirmed that the mechanical efficiency decreased as the fuel mass increased. Next, to check the effect of lubrication conditions on friction, the friction loss was measured by controlling the oil temperature. It was confirmed that friction loss increased as the oil temperature decreased at the same fuel mass. As the oil temperature decreases, the viscosity increases, resulting in decreased mechanical efficiency and increased friction loss. | en_US |
dc.description.sponsorship | 본 논문은 현대자동차 그룹과 ‘2022년도 4단계 두뇌 한국21 사업(4단계 BK21사업)’의 지원으로 작성되었습니다. 아낌없는 지원에 감사드립니다. | en_US |
dc.language | ko | en_US |
dc.publisher | 한국분무공학회 | en_US |
dc.subject | Gasoline engine(가솔린 엔진) | en_US |
dc.subject | Lubricant friction(윤활마찰) | en_US |
dc.subject | Combustion pressure(연소압) | en_US |
dc.subject | Oil temperature (오일 온도) | en_US |
dc.title | 가솔린 엔진에서 연료 분사량 및 오일 온도에 따른 피스톤 마찰손실 특성 연구 | en_US |
dc.title.alternative | Study on the Characteristics of Piston Friction Losses for Fuel Injected Mass and Oil Temperature in a Gasoline Engine | en_US |
dc.type | Article | en_US |
dc.relation.no | 3 | - |
dc.relation.volume | 27 | - |
dc.identifier.doi | 10.15435/JILASSKR.2022.27.3.161 | en_US |
dc.relation.page | 161-166 | - |
dc.relation.journal | 한국분무공학회지 | - |
dc.contributor.googleauthor | 강종대 | - |
dc.contributor.googleauthor | 조진우 | - |
dc.contributor.googleauthor | 박성욱 | - |
dc.sector.campus | S | - |
dc.sector.daehak | 공과대학 | - |
dc.sector.department | 기계공학부 | - |
dc.identifier.pid | parks | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.