Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박주현 | - |
dc.date.accessioned | 2022-10-28T04:34:29Z | - |
dc.date.available | 2022-10-28T04:34:29Z | - |
dc.date.issued | 2014-04 | - |
dc.identifier.citation | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, v. 45A, NO. 4, Page. 2046-2054 | en_US |
dc.identifier.issn | 1073-5623;1543-1940 | en_US |
dc.identifier.uri | https://link.springer.com/article/10.1007%2Fs11661-013-2132-x | en_US |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/175936 | - |
dc.description.abstract | Oxide inclusions in high-Mn steel welds were analyzed and almost all of which were found to belong to the MnO-Al2O3-SiO2 system. In this study, the inclusions were categorized based on MnS morphology into the following two types: (1) aluminosilicate with a MnS patch, or (2) aluminosilicate with a MnS shell. The most frequently detected was type 1, the formation mechanism of which was investigated using commercially available thermochemical computing software, FactSage (TM) (ver. 6.3). The thermodynamic calculations predicted that galaxite (MnAl2O4), tephroite (Mn2SiO4), and MnS could precipitate during solidification. However, because of the fast cooling rate in welding processes, galaxite and tephroite phases were unable to fully crystallize, but rather were supercooled as glassy phases. In order to confirm the validity of the thermodynamic calculations, the composition of the observed inclusions was compared with the MnO-SiO2-Al2O3 ternary phase diagram, resulting in remarkably good agreement. Furthermore, it was found that the type of the oxide inclusions was dependent on their location (i.e., MnS shell- and MnS patch-type oxides were detected at the dendritic core and interdendritic boundary, respectively). Both types of oxides were occasionally found in one oxide, near the interdendritic boundary. This indicates that the morphology variation originates from the redistribution of solute due to fast solidification. | en_US |
dc.description.sponsorship | The authors would like to thank to POSCO Technical Research Laboratory for financial support. | en_US |
dc.language | en | en_US |
dc.publisher | ASM International | en_US |
dc.subject | MNS PRECIPITATION | en_US |
dc.subject | INCLUSIONS | en_US |
dc.subject | PARTICLES | en_US |
dc.subject | TWIP STEELS | en_US |
dc.subject | SI/MN DEOXIDIZED STEEL | en_US |
dc.subject | SOLIDIFICATION STRUCTURE | en_US |
dc.subject | NUCLEATION | en_US |
dc.subject | ACICULAR FERRITE | en_US |
dc.subject | ALLOY | en_US |
dc.title | Oxide Formation Mechanisms in High Manganese Steel Welds | en_US |
dc.type | Article | en_US |
dc.relation.no | 4 | - |
dc.relation.volume | 45A | - |
dc.identifier.doi | 10.1007/s11661-013-2132-x | en_US |
dc.relation.page | 2046-2054 | - |
dc.relation.journal | Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science | - |
dc.contributor.googleauthor | Kim, Dooyoung | - |
dc.contributor.googleauthor | Han, Kyutae | - |
dc.contributor.googleauthor | Lee, Bongkeun | - |
dc.contributor.googleauthor | Han, Ilwook | - |
dc.contributor.googleauthor | Park, Joo Hyun | - |
dc.contributor.googleauthor | Lee, Changhee | - |
dc.sector.campus | E | - |
dc.sector.daehak | 공학대학 | - |
dc.sector.department | 재료화학공학과 | - |
dc.identifier.pid | basicity | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.