799 0

Full metadata record

DC FieldValueLanguage
dc.contributor.author전형탁-
dc.date.accessioned2019-11-19T05:34:41Z-
dc.date.available2019-11-19T05:34:41Z-
dc.date.issued2017-01-
dc.identifier.citationJOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, v. 35, no. 1, Article no. 01A101en_US
dc.identifier.issn0734-2101-
dc.identifier.issn1520-8559-
dc.identifier.urihttps://avs.scitation.org/doi/10.1116/1.4964889-
dc.identifier.urihttps://repository.hanyang.ac.kr/handle/20.500.11754/112295-
dc.description.abstractThis work proposes a new method toward improving dielectric barrier characteristics through low dielectric permittivity (k) amorphous silicon nitride films (SiNx) deposited by plasma enhanced atomic layer deposition (PEALD). The dielectric constants of the atomic layer deposition (ALD) SiNx films were in the range of 4.25-4.71 and were relatively lower than that of SiNx deposited by plasma enhanced chemical vapor deposition (PECVD). The dielectric constants of the PEALD SiNx films were nearly identical to the values for PECVD silicon carbon nitride films (SiCN). Although the ALD SiNx films were low-k, they exhibited similar levels of film stress as PECVD SiNx, and the density of ALD SiNx film was higher than that of PECVD SiCN films. The ability to suppress copper (Cu) diffusion through 10-nm thick SiNx dielectric barriers in silicon dioxide/barrier/Cu/tantalum nitride structures on Si substrates was evaluated via Auger electron spectroscopy analysis. Although PEALD SiNx films possessed low dielectric constants (< 5), their barrier property to Cu diffusion was nearly equivalent to that of PECVD SiNx. The PECVD SiCN films also exhibited low dielectric constants but showed weak barrier property. Therefore, the low-k ALD SiNx reported herein could be used as a thin film thickness dielectric barrier layer in future advanced technologies. VC 2016 American Vacuum Society.en_US
dc.description.sponsorshipThis work was a collaboration between Hanyang University and the Memory Thin film Technology team at Samsung Electronics. Fabrications were performed with 300 mm semiconductor tools by the Memory Thin film Technology team at Samsung Electronics. The authors thank Jeon Heesung for his help with sample preparation and Jang Munseok for useful discussions regarding stress measurements. This study was supported by a National Research Foundation of Korea (NRF) grant funded by the Korean Government (MEST) (Grant No. NRF-2015R1A2A1A10052324).en_US
dc.language.isoenen_US
dc.publisherA V S AMER INST PHYSICSen_US
dc.subjectCHEMICAL-VAPOR-DEPOSITIONen_US
dc.titleDielectric barrier characteristics of Si-rich silicon nitride films deposited by plasma enhanced atomic layer depositionen_US
dc.typeArticleen_US
dc.relation.no1-
dc.relation.volume35-
dc.identifier.doi10.1116/1.4964889-
dc.relation.page1-5-
dc.relation.journalJOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-
dc.contributor.googleauthorKim, Hwanwoo-
dc.contributor.googleauthorSong, Hyoseok-
dc.contributor.googleauthorShin, Changhee-
dc.contributor.googleauthorKim, Kangsoo-
dc.contributor.googleauthorJang, Woochool-
dc.contributor.googleauthorKim, Hyunjung-
dc.contributor.googleauthorShin, Seokyoon-
dc.contributor.googleauthorJeon, Hyeongtag-
dc.relation.code2017001476-
dc.sector.campusS-
dc.sector.daehakCOLLEGE OF ENGINEERING[S]-
dc.sector.departmentDIVISION OF MATERIALS SCIENCE AND ENGINEERING-
dc.identifier.pidhjeon-
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > MATERIALS SCIENCE AND ENGINEERING(신소재공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE