Single-chamber fabrication of high-performance low-temperature solid oxide fuel cells with grain-controlled functional layers
- Title
- Single-chamber fabrication of high-performance low-temperature solid oxide fuel cells with grain-controlled functional layers
- Author
- 김영범
- Keywords
- YTTRIA-STABILIZED ZIRCONIA; ELECTROLYTE; DEPOSITION; EXCHANGE; FILMS
- Issue Date
- 2017-01
- Publisher
- ROYAL SOC CHEMISTRY
- Citation
- JOURNAL OF MATERIALS CHEMISTRY A, v. 5, no. 5, page. 2029-2036
- Abstract
- A one-step process has been developed for the fabrication of thin film membrane-electrode assemblies with multi-layer electrolytes for use in high-performance, low-temperature solid oxide fuel cells (LT-SOFCs). By controlling the sputter processing conditions, a dense yttria-stabilized zirconia (YSZ) electrolyte film was fabricated onto a porous aluminum oxide (AAO) anodic substrate. Thin, grain-controlled layers (GCLs) were subsequently formed at the cathodic interface to provide a homogeneous functional layer, which significantly enhanced the kinetics of the oxygen reduction reaction (ORR). This is attributed to the fine grains and increased grain boundary density of this layer, which were achieved without thermal annealing. Using this new device architecture, the fuel cell was able to reach a peak power density of 343 mW cm(-2) at 450 degrees C.
- URI
- https://pubs.rsc.org/en/content/articlelanding/2017/TA/C6TA07237B#!divAbstracthttps://repository.hanyang.ac.kr/handle/20.500.11754/112281
- ISSN
- 2050-7488; 2050-7496
- DOI
- 10.1039/c6ta07237b
- Appears in Collections:
- COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
- Files in This Item:
There are no files associated with this item.
- Export
- RIS (EndNote)
- XLS (Excel)
- XML