Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 정희준 | - |
dc.date.accessioned | 2019-05-21T23:44:39Z | - |
dc.date.available | 2019-05-21T23:44:39Z | - |
dc.date.issued | 2008-12 | - |
dc.identifier.citation | 이학기술연구지, v. 12, Page. 9-13 | en_US |
dc.identifier.issn | 2005-9051 | - |
dc.identifier.uri | https://www.earticle.net/Article/A106279 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/105191 | - |
dc.description.abstract | 본 실험에서는 E-Beam lithography 기술을 이용해서 3차원 구조물인 air-bridge를 제작해 보았다. wafer에 서로 다른 민감도를 지닌 PMMA를 다층구조로 쌓아올린 후 다양한 dose 값의 노광을 통해 bridge 형태의 구조를 제작하였다. 또한 설계된 디자인으로 patterning후에 한번의 Au, Cr 증착을 통해 bridge를 완성하였다. 본 연구에서 사용된 제작 방법을 통해 기존의 방법보다 빠른 진행과정으로 보다 신뢰성 있는 air-bridge를 완성하였으며 다양한 형태의 복잡한 구조물에 응용 가능함을 알게 되었다. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 한양대학교 이학기술연구소 | en_US |
dc.title | E-beam Lithography를 이용한 3차원 Air-bridge 구조의 제작기법 | en_US |
dc.title.alternative | Fabircation Method of 3-Dimensional Air-bridge Structure using E-beam Lithography | en_US |
dc.type | Article | en_US |
dc.relation.journal | 이학기술연구지 | - |
dc.contributor.googleauthor | Park, Joonwoo | - |
dc.contributor.googleauthor | Jeong, Heejun | - |
dc.relation.code | 2012101941 | - |
dc.sector.campus | E | - |
dc.sector.daehak | COLLEGE OF SCIENCE AND CONVERGENCE TECHNOLOGY[E] | - |
dc.sector.department | DEPARTMENT OF APPLIED PHYSICS | - |
dc.identifier.pid | hjeong | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.