2006-03 | Bending performance analysis of aluminum-composite hybrid tube beams | 최낙삼 |
2004-12 | Bending performance evaluation of reinforced aluminum square tube beams considering local buckling behavior | 최낙삼 |
2019-01 | Bending strength of CFRP laminated adhesive joints fabricated by vacuum-assisted resin transfer molding | 최낙삼 |
2008-05 | Characterization of the fracture process of notched glass fiber/aluminum hybrid laminates by acoustic emission | 최낙삼 |
2002-03 | Constraint Effect of Adherends on the Fracture of Adhesive Joint (1st report, Microscopic observation of the damage zone around a crack tip) | 최낙삼 |
2002-03 | Constraint Effect of Adherends on the Fracture of Adhesive Joint (1st report, Microscopic Observation of the Damage Zone around a Crack Tip) | 최낙삼 |
2009-10 | Cross-Link Density Measurement and Thermal Oxidative Degradation Analysis of a Carbon Black Compounded EPDM Rubber Hose | 최낙삼 |
2019-10 | Cyclic elastic modulus and low cycle fatigue life of woven-type GFRP coated aluminum plates | 최낙삼 |
2002-07 | Damage zone around crack tip and fracture toughness of rubber-modified epoxy resin under mixed-mode conditions | 최낙삼 |
2002-07 | Damage zone around crack tip and fracture toughness of rubber-modified epoxy resin under mixed-mode conditions | 최낙삼 |
2002-04 | Damage zone around tip of an interface crack between rubber-modified epoxy resin and aluminum | 최낙삼 |
2002-04 | Damage Zone around Tip of an Interface Crack between Rubber-Modified Epoxy Resin and Aluminum | 최낙삼 |
2003-03 | Detection of microfracture processes in composite laminates by thermo-acoustic emission | 최낙삼 |
2007-04 | Development of a precision indentation and scratching system with a tool force and displacement control module | 최낙삼 |
2003-06 | A Double Cantilever Sandwich Beam Method for Evaluating Dynamic Characteristics of Rubber Materials | 최낙삼 |
2016-11 | Dynamic stress analysis of the specimen gauge portion with a circular profile for the ultrasonic fatigue test | 최낙삼 |
2004-01 | Effect of Bond Thickness on the Fracture Toughness of Adhesive Joints | 최낙삼 |
2017-02 | Effect of Compaction Treatment on Laminated CFRP Composites Fabricated by Vacuum-Assisted Resin-Transfer Molding | 최낙삼 |
2002-11 | Effect of plasma treatment of aluminum on the bonding characteristics of aluminum-CFRP composite joints | 최낙삼 |
2002-07 | Effect of Plasma Treatment of Aluminum on the Bonding Characteristics of Aluminum-CFRP Composite Joints | 최낙삼 |
2007-02 | Effects of fiber orientation on the acoustic emission and fracture characteristics of composite laminates | 최낙삼 |
2000-07 | Effects of Impact Loading Rate on the Delamination Behavior of Composite Laminates | 최낙삼 |
2000-01 | Effects of impact loading rate on the delamination behavior of composite laminates | 최낙삼 |
2022-02 | Effects of Notch Radius and Thickness on the Tensile Strength and Fracture Mechanisms of Al6061-T6 Plate Specimens | 최낙삼 |
2015-11 | Effects of thermal shock fatigue on short glass fiber-reinforced PBT composites embedded by thermally conductive particles | 최낙삼 |
2018-02 | Electrochemical degradation tests on a carbon-black-filled ethylene propylene diene monomer rubber under tensile strain | 최낙삼 |
2017-02 | Equivalent Young's modulus of composite resin for simulation of stress during dental restoration | 최낙삼 |
2001-11 | Evaluation of the impactive-surface-fracture behavior of glass plates using a back-surface strain measurement | 최낙삼 |
2001-11 | Evaluation of the impactive-surface-fracture behavior of glass plates using a back-surface strain measurement | 최낙삼 |
2005-12 | Fiber Orientation Effects On The Fracture Process And Acoustic Emission Characteristics Of Composite Laminates | 최낙삼 |