A Simple Method for Identifying Mechanical Parameters Based on Integral Calculation
- Title
- A Simple Method for Identifying Mechanical Parameters Based on Integral Calculation
- Author
- 윤영두
- Keywords
- Integral calculation; Mechanical parameter identification; Moment of inertia; off-line identification; Viscous friction coefficient
- Issue Date
- 2016-07
- Publisher
- KOREAN INST POWER ELECTRONICS
- Citation
- JOURNAL OF POWER ELECTRONICS (2016), v. 16, no. 4, page. 1387-1395
- Abstract
- A method for the identification of mechanical parameters based on integral calculation is presented. Both the moment of inertia and the friction constant are identified by the method developed here, which is based on well-known mechanical differential equations. The mechanical system under test is excited according to a pre-determined low-frequency sinusoidal motion, minimizing the distortion, and increasing the accuracy of the results. The parameters are identified using integral calculation, increasing the robustness of the results against measurement noise. Experimental data are supported by simulation, confirming the effectiveness of the proposed technique. The performance improvements shown here are of use in the design of speed and position controllers and observers. Owing to its simplicity, this method can be readily applied to commercial inverter products.
- URI
- http://koreascience.or.kr/article/ArticleFullRecord.jsp?cn=E1PWAX_2016_v16n4_1387https://repository.hanyang.ac.kr/handle/20.500.11754/74661
- ISSN
- 1598-2092; 2093-4718
- DOI
- 10.6113/JPE.2016.16.4.1387
- Appears in Collections:
- COLLEGE OF ENGINEERING[S](공과대학) > AUTOMOTIVE ENGINEERING(미래자동차공학과) > Articles
- Files in This Item:
There are no files associated with this item.
- Export
- RIS (EndNote)
- XLS (Excel)
- XML