220 0

Full metadata record

DC FieldValueLanguage
dc.contributor.author권병일-
dc.date.accessioned2018-06-20T05:36:43Z-
dc.date.available2018-06-20T05:36:43Z-
dc.date.issued2017-06-
dc.identifier.citationIEEE TRANSACTIONS ON MAGNETICS, v. 53, No. 6, Article no. 8106604en_US
dc.identifier.issn0018-9464-
dc.identifier.issn1941-0069-
dc.identifier.urihttps://ieeexplore.ieee.org/abstract/document/7855764/-
dc.identifier.urihttps://repository.hanyang.ac.kr/handle/20.500.11754/72175-
dc.description.abstractThis paper compares the performance of three different topologies of spoke-type permanent-magnet vernier machines (PMVM): 1) dual airgap dual stator winding (DSW); 2) dual airgap single stator winding (SSW); and 3) single airgap (SA). These topologies were compared in terms of torque/machine volume, cogging torque, and torque ripples. The 2-D finite element method was utilized to compare the performance of the three models. The dual airgap PMVM with a SSW showed similar performance with the same machine outer diameter and similar power in terms of torque/machine volume and torque ripples compared with the DSW model. The performance of the SSW model was better than that of the SA model for the same outer diameter and rotor. Furthermore, stator slot optimization was performed to improve torque/machine volume and reduce torque ripples in the SSW model.en_US
dc.description.sponsorshipThis work was supported in part by the BK21PLUS Program through the Ministry of Education, National Research Foundation of Korea, and in part by the Technology Innovation Program (or Industrial Strategic Technology Development Program) under Grant 10051147 (Development of a 3-kHz IPM-type Low-cost Servo Motor and Integrated Network Drive for Manufacturing Robots) funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea).en_US
dc.language.isoen_USen_US
dc.publisherIEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INCen_US
dc.subjectDual airgapen_US
dc.subjectfinite element methoden_US
dc.subjectpermanent-magnet vernier machine (PMVM)en_US
dc.subjectsingle airgap (SA)en_US
dc.subjectDESIGNen_US
dc.titlePerformance Comparison of Dual Airgap and Single Airgap Spoke-Type Permanent-Magnet Vernier Machinesen_US
dc.typeArticleen_US
dc.relation.no6-
dc.relation.volume53-
dc.identifier.doi10.1109/TMAG.2017.2669105-
dc.relation.page1-4-
dc.relation.journalIEEE TRANSACTIONS ON MAGNETICS-
dc.contributor.googleauthorRaza, Mudassir-
dc.contributor.googleauthorZhao, Wenliang-
dc.contributor.googleauthorLipo, Thomas A-
dc.contributor.googleauthorKwon, Byung-il-
dc.relation.code2017003573-
dc.sector.campusE-
dc.sector.daehakCOLLEGE OF ENGINEERING SCIENCES[E]-
dc.sector.departmentDIVISION OF ELECTRICAL ENGINEERING-
dc.identifier.pidbikwon-
Appears in Collections:
COLLEGE OF ENGINEERING SCIENCES[E](공학대학) > ELECTRICAL ENGINEERING(전자공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE