| 2011-03 | Fabrication of Ag/Al(OH)(3) mesoporous nanocomposite film | 김영도 |
| 2011-11 | Fabrication of Fine-grained Molybdenum Sintered Body via Modified Sintering Process | 김영도 |
| 2014-02 | Fabrication of Mo-Si-B intermetallic powder by mechano-chemical process | 김영도 |
| 2020-09 | FABRICATION OF MOLYBDENUM ALLOY WITH DISTRIBUTED HIGH-ENTROPY ALLOY VIA PRESSURELESS SINTERING | 김영도 |
| 2015-06 | FABRICATION OF POROUS Ti BY THERMAL DECOMPOSITION AND SINTERING OF PMMA/TiH2 POWDER COMPACT | 김영도 |
| 2017-04 | Fabrication of Ta2O5 Dispersion-Strengthened Mo-Si-B Alloy by Powder Metallurgical Method | 김영도 |
| 2016-02 | Fe 및 Ni기 산화물 분산 강화 합금의 연구동향 | 김영도 |
| 2017-05 | Fe-5Y2O3 조성의 기계적 합금화 분말에 형성된 산화물의 상변태 거동 | 김영도 |
| 2016-11 | Fluctuation of solid-liquid interface of faceted phase and nonfaceted phase by periodic temperature variation | 김영도 |
| 2012-09 | Formation of MoSi2 Layer by Hydrogen Reduction and Si-pack Cementation | 김영도 |
| 2017-09 | Formation of nanostructured rutile TiO2 synthesized on Ti powder via thermal oxidation | 김영도 |
| 2015-01 | Freeze drying for porous Mo with different sublimable vehicle compositions in the camphor-naphthalene system | 김영도 |
| 2016-09 | From Zirconium Nanograins to Zirconia Nanoneedles | 김영도 |
| 2020-07 | GAS ATOMIZATION PARAMETRIC STUDY ON THE VIGA-CC BASED SYNTHESIS OF TITANIUM POWDER | 김영도 |
| 2015-05 | Grain refinement in heavy rare earth element-free sintered Nd-Fe-B magnets by addition of a small amount of molybdenum | 김영도 |
| 2017-12 | Heat Treatment Effect on the Behavior of Oxide Particles in Mechanically Alloyed Oxide Dispersion Strengthened Powders | 김영도 |
| 2011-11 | High coercive Nd-Fe-B magnets fabricated via two-step sintering | 김영도 |
| 2011-11 | High coercive Nd-Fe-B magnets fabricated via two-step sintering | 김영도 |
| 2016-01 | Homogeneous Dispersion of Carbon Nanotubes on Surface-Modified Bulk Titanium Substrates by Thermal Chemical Vapor Deposition | 김영도 |
| 2017-06 | IJRMHM special issue, selected papers in the session of "Refractory Metals and Hard Materials" for 14th ISNNM | 김영도 |
| 2019-01 | Improvement of high temperature mechanical properties of Ni-based oxide dispersion strengthened alloys by preferential formation of Y-Ti-O complex oxide | 김영도 |
| 2021-08 | Improving spreadability of hydrogenation–dehydrogenation Ti powder via surface treatment using silane-based compounds | 김영도 |
| 2017-07 | Influence of B and N on the microstructural characteristics and high-temperature strength of 9Cr-2W steel during an aging treatment | 김영도 |
| 2022-04 | Material extrusion-based three-dimensional printing of WC–Co alloy with a paste prepared by powder coating | 김영도 |
| 2012-02 | Mechanical properties of (Nd,Dy)-Fe-B magnets sintered via cyclic sintering | 김영도 |
| 2017-06 | Mechanical properties of Mo-Nb-Si-B quaternary alloy fabricated by powder metallurgical method | 김영도 |
| 2017-01 | Mechanical Properties of Mo-Si-B Alloys Fabricated by Using Core-Shell Powder with Dispersion of Yttria Nanoparticles | 김영도 |
| 2011-07 | Microstructural changes of aluminized Alloy 617 during high-temperature aging | 김영도 |
| 2016-06 | Microstructure and electrical properties of SiC dispersed molybdenum silicide composite | 김영도 |
| 2012-06 | Microstructure and mechanical properties of a Mg-Zn4.3Y0.7 alloy powder reinforced by quasi-crystalline particles | 김영도 |
