2011-06 | Loss Characteristics of SFES With Amorphous Core for PMSM | 성태현 |
2011-07 | Low Temperature Sintering and Microwave Dielectric Properties of B(2)O(3)-added LiAlSiO(4) Ceramics | 성태현 |
2012-06 | Low temperature sintering of ZnO and MnO2-added (Na0.5K0.5)NbO3 ceramics | 성태현 |
2011-10 | Low-Temperature Sintering and Piezoelectric Properties of 0.65Pb(Zr1-xTix)O-3-0.35Pb(Ni0.33Nb0.67)O-3 Ceramics | 성태현 |
2011-05 | Microstructure and Electrical Properties of Amorphous Bi5Nb3O15 Films Grown on Cu/Ti/SiO2/Si Substrates Using RF Magnetron Sputtering | 성태현 |
2020-01 | Mobility of Air-Stable p-type Polythiophene Field-Effect Transistors Fabricated Using Oxidative Chemical Vapor Deposition | 성태현 |
2019-05 | A multifunctional road-compatible piezoelectric energy harvester for autonomous driver-assist LED indicators with a self-monitoring system | 성태현 |
2011-06 | Nanoscale retention-loss dynamics of polycrystalline PbTiO3 nanotubes | 성태현 |
2016-04 | Non-resonant piezoelectric transformer based power converter for ultra-low-power electronic devices | 성태현 |
2018-03 | Nonlinear Piezoelectric Energy Harvester with Ball Tip Mass | 성태현 |
2011-06 | Observation of mechanical fracture and corresponding domain structure changes of polycrystalline PbTiO3 nanotubes | 성태현 |
2014-05 | Optimal design and application of a piezoelectric energy harvesting system using multiple piezoelectric modules | 성태현 |
2014-12 | Optimization of a 0.69PZT-0.31PZNN thick film by controlling slurry viscosity and tape-casting blade height | 성태현 |
2020-05 | Optimization of the Energy Conversion Efficiency by Bending Deflection Piezoelectric Cantilever Beams | 성태현 |
2018-05 | Optimized composite piezoelectric energy harvesting floor tile for smart home energy management | 성태현 |
2011-11 | Patternable solution process for fabrication of flexible polymer solar cells using PDMS | 성태현 |
2019-08 | Performance of a speed bump piezoelectric energy harvester for an automatic cellphone charging system | 성태현 |
2019-06 | Piezoelectric device operating as sensor and harvester to drive switching circuit in LED shoes | 성태현 |
2017-07 | Piezoelectric energy harvester impedance matching using a piezoelectric transformer | 성태현 |
2013-04 | Piezoelectric energy harvesting system for the vertical vibration of superconducting Maglev train | 성태현 |
2016-09 | Piezoelectric energy harvesting system with magnetic pendulum movement for self-powered safety sensor of trains | 성태현 |
2017-02 | A piezoelectric impact-induced vibration cantilever energy harvester from speed bump with a low-power power management circuit | 성태현 |
2012-03 | Piezoelectric properties of CuO-added (Na0.5K0.5)NbO3 ceramic multilayers | 성태현 |
2013-01 | Piezoelectric Properties of Lead-free Piezoelectric Ceramics and Their Energy Harvester Characteristics | 성태현 |
2012-06 | The piezoresponse force microscopy investigation of self-polarization alignment in poly(vinylidene fluoride-co-trifluoroethylene) ultrathin films | 성태현 |
2020-02 | Propeller-based Underwater Piezoelectric Energy Harvesting System for an Autonomous IoT Sensor System | 성태현 |
2017-06 | PVDF based flexible piezoelectric nanogenerators using conjugated polymer:PCBM blend systems | 성태현 |
2011-10 | Reclosing operation characteristics of the flux-coupling type SFCL in a single-line-to ground fault | 성태현 |
2013-01 | Relation between piezoelectric properties of ceramics and output power density of energy harvester | 성태현 |
2014-09 | Relationship between current and impedance in piezoelectric energy harvesting system for water waves | 성태현 |