Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김학성 | - |
dc.date.accessioned | 2017-09-05T02:27:42Z | - |
dc.date.available | 2017-09-05T02:27:42Z | - |
dc.date.issued | 2015-11 | - |
dc.identifier.citation | 대한기계학회 창립 70주년 기념 학술대회, 2015.11, Page. 2369-2372 | en_US |
dc.identifier.uri | http://www.dbpia.co.kr/Article/NODE06576084 | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/28894 | - |
dc.description.abstract | For the manufacturing of the polymer based composite materials, the understanding of curing process during high temperature is very important to improve the productivity and manufacturing process. However, the curing behavior of thermoplastic composite material is still not well understood although the cure monitoring system for thermosetting composite material was developed in many ways. Therefore, in this study, the in-situ phase change monitoring system was devised which can measure the phase change of thermoplastic composite in real time during the manufacturing process. To investigate the phase change process of thermoplastic composite, changing of dissipation points were obtained by using the dielectric sensor. Based on result, the optimal phase changing process of glass fiber reinforced thermoplastic composite could be devised which has the reduced cur-ing time with better productivity. | en_US |
dc.description.sponsorship | This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government(MEST) (No. 2013M2A2A9043280). This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education(2012R1A6A1029029). | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 대한기계학회 | en_US |
dc.subject | Thermoplastic composite material | en_US |
dc.subject | Dielectrometry | en_US |
dc.subject | Dissipation factor | en_US |
dc.subject | phase change | en_US |
dc.subject | 열가소성 복합재료 | en_US |
dc.subject | 손실계수 | en_US |
dc.subject | 상 변화 | en_US |
dc.title | 유전센서를 이용한 섬유강화 열가소성 복합재료 상변화 모니터링 | en_US |
dc.title.alternative | In situ phase change monitoring of fiber reinforced thermoplastic composite using dielectric sensor | en_US |
dc.type | Article | en_US |
dc.relation.page | 1-2 | - |
dc.contributor.googleauthor | 이인규 | - |
dc.contributor.googleauthor | 김도형 | - |
dc.contributor.googleauthor | 김학성 | - |
dc.contributor.googleauthor | Lee, In-Gyu | - |
dc.contributor.googleauthor | Kim, Do-Hyoung | - |
dc.contributor.googleauthor | Kim, Hak-Sung | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | kima | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.