Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Megumi Kawasaki | - |
dc.date.accessioned | 2017-04-06T00:10:37Z | - |
dc.date.available | 2017-04-06T00:10:37Z | - |
dc.date.issued | 2015-07 | - |
dc.identifier.citation | ARCHIVES OF METALLURGY AND MATERIALS, v. 60, NO 2, Page. 1423-1426 | en_US |
dc.identifier.issn | 1733-3490 | - |
dc.identifier.issn | 2300-1909 | - |
dc.identifier.uri | https://www.degruyter.com/view/j/amm.2015.60.issue-2/amm-2015-0145/amm-2015-0145.xml | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/26617 | - |
dc.description.abstract | In this study, a continuously casted ZK60A magnesium alloy (Mg-Zn-Zr) was extruded in two different extrusion ratios, 6:1 and 10:1. The evolution of precipitates was investigated on the two extruded materials and compared with that of as-casted material. The microstructural analysis was performed by electron backscatter diffraction and transmission electron microscopy, and the compositional information was obtained using energy-dispersive X-ray spectroscopy. Several distinct morphologies of precipitates were observed, such as dot, rod, and disk shaped. The formation mechanisms of those precipitates were discussed with respect to the heat and strain during the extrusion process. | en_US |
dc.description.sponsorship | This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning (MSIP) of Korean government (Grant No. 2012R1A1A1012983). The authors would also like to acknowledge the financial support from the R&D Convergence Program of MSIP (Ministry of Science, ICT and Future Planning) and ISTK (Korea Research Council for Industrial Science and Technology) in the Republic of Korea (Grant No. B551179-11-02-00). | en_US |
dc.language.iso | en | en_US |
dc.publisher | POLSKA AKAD NAUK | en_US |
dc.subject | magnesium alloy | en_US |
dc.subject | ZK60A | en_US |
dc.subject | precipitation | en_US |
dc.subject | extrusion | en_US |
dc.title | EVOLUTION OF PRECIPITATE MORPHOLOGY DURING EXTRUSION IN Mg ZK60A ALLOY | en_US |
dc.type | Article | en_US |
dc.relation.no | 2 | - |
dc.relation.volume | 60 | - |
dc.identifier.doi | 10.1515/amm-2015-0145 | - |
dc.relation.page | 1423-1426 | - |
dc.relation.journal | ARCHIVES OF METALLURGY AND MATERIALS | - |
dc.contributor.googleauthor | Park, J. | - |
dc.contributor.googleauthor | Jung, K.H. | - |
dc.contributor.googleauthor | Lee, G.A. | - |
dc.contributor.googleauthor | Kawasaki, M. | - |
dc.contributor.googleauthor | Ahn, B. | - |
dc.relation.code | 2015010929 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MATERIALS SCIENCE AND ENGINEERING | - |
dc.identifier.pid | megumi | - |
dc.identifier.researcherID | A-1872-2010 | - |
dc.identifier.orcid | http://orcid.org/0000-0003-0028-3007 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.