341 0

Full metadata record

DC FieldValueLanguage
dc.contributor.author박관규-
dc.date.accessioned2017-03-29T02:32:33Z-
dc.date.available2017-03-29T02:32:33Z-
dc.date.issued2015-07-
dc.identifier.citationASME Proceedings | MEMS and NEMS, Page. 1-4en_US
dc.identifier.isbn978-0-7918-5690-1-
dc.identifier.urihttp://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2472684-
dc.identifier.urihttp://hdl.handle.net/20.500.11754/26408-
dc.descriptionASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels Volume 3: Advanced Fabrication and Manufacturing; Emerging Technology Frontiers; Energy, Health and Water- Applications of Nano-, Micro- and Mini-Scale Devices; MEMS and NEMS; Technology Update Talks; Thermal Management Using Micro Channels, Jets, Sprays San Francisco, California, USA, July 6–9, 2015en_US
dc.description.abstractWe present the operation of capacitive micromachined ultrasonic transducers (CMUTs) in permanent contact mode as an efficient transducer. The gap height of our transducers is chosen to be slightly smaller than the static deflection of the plate due to the pressure difference between the ambient and the vacuum cavity. Thus, the plates are in contact with the bottom of the cavities even with no dc bias applied. The devices were fabricated based on the thick box process. High-temperature assisted direct wafer bonding technique was used to fabricate devices with such large cell size (radii ∼ 2000 μm) featuring low frequencies ∼100–150 kHz. Extensive acoustic characterization was performed to demonstrate the behavior of such CMUTs in terms of displacement profile, output pressure and acoustic pitch-catch response. A maximum sound pressure of ∼145 dB (SPL) at the transducer surface is measured at 240 V dc and 10 V ac with 100 cycles of burst signal. This is a great improvement from conventional CMUTs (with deeper gap height, operating at 55 kHz), which requires 350 V dc and 200 V ac in order to achieve an output pressure of 129 dB (SPL) at the transducer surface. The results presented in this paper demonstrate that operating CMUTs in permanent contact mode indeed enhances the device output pressure, and provides a good candidate for efficient ultrasonic transducers. Copyright © 2015 by ASMEen_US
dc.language.isoenen_US
dc.publisherASMEen_US
dc.subjectPressureen_US
dc.titleCMUTS IN PERMANENT CONTACT OPERATION FOR HIGH OUTPUT PRESSUREen_US
dc.typeArticleen_US
dc.identifier.doi10.1115/IPACK2015-48733-
dc.relation.page1-4-
dc.contributor.googleauthorHo, Min-Chieh-
dc.contributor.googleauthorHoffmann, Maik-
dc.contributor.googleauthorUnger, Alexander-
dc.contributor.googleauthorPark, Kwan Kyu-
dc.contributor.googleauthorKupnik, Mario-
dc.contributor.googleauthorKhuri-Yakub, Butrus T.-
dc.sector.campusS-
dc.sector.daehakCOLLEGE OF ENGINEERING[S]-
dc.sector.departmentDIVISION OF MECHANICAL ENGINEERING-
dc.identifier.pidkwankyu-
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE