Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 선양국 | - |
dc.date.accessioned | 2017-03-10T07:18:28Z | - |
dc.date.available | 2017-03-10T07:18:28Z | - |
dc.date.issued | 2015-07 | - |
dc.identifier.citation | JOURNAL OF MATERIALS CHEMISTRY A, v. 3, NO 28, Page. 14598-14608 | en_US |
dc.identifier.issn | 2050-7488 | - |
dc.identifier.issn | 2050-7496 | - |
dc.identifier.uri | http://pubs.rsc.org/-/content/articlehtml/2015/ta/c5ta02233a | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/26019 | - |
dc.description.abstract | A Li-rich layered-spinel material with a target composition Li1.17Ni0.25Mn1.08O3 (xLi[Li1/3Mn2/3]O-2.(1 - x) LiNi0.5Mn1.5O4, (x = 0.5)) was synthesized by a self-combustion reaction (SCR), characterized by XRD, SEM, TEM, Raman spectroscopy and was studied as a cathode material for Li-ion batteries. The Rietveld refinement results indicated the presence of monoclinic (Li[Li1/3Mn2/3]O-2) (52%), spinel (LiNi0.5Mn1.5O4) (39%) and rhombohedral LiNiO2 (9%). The electrochemical performance of this Li-rich integrated cathode material was tested at 30 degrees C and compared to that of high voltage LiNi0.5Mn1.5O4 spinel cathodes. Interestingly, the layered-spinel integrated cathode material exhibits a high specific capacity of about 200 mA h g(-1) at C/10 rate as compared to 180 mA h g(-1) for LiNi0.5Mn1.5O4 in the potential range of 2.4-4.9 V vs. Li anodes in half cells. The layered-spinel integrated cathodes exhibited 92% capacity retention as compared to 82% for LiNi0.5Mn1.5O4 spinel after 80 cycles at 30 degrees C. Also, the integrated cathode material can exhibit 105 mA h g(-1) at 2 C rate as compared to 78 mA h g(-1) for LiNi0.5Mn1.5O4. Thus, the presence of the monoclinic phase in the composite structure helps to stabilize the spinel structure when high specific capacity is required and the electrodes have to work within a wide potential window. Consequently, the Li1.17Ni0.25Mn1.08O3 composite material described herein can be considered as a promising cathode material for Li ion batteries. | en_US |
dc.description.sponsorship | Partial support for this work was obtained from the Israel Science Foundation (ISF) in the framework of the INREP project and from the Israel Ministry of Science and Technology in the framework of the Israel-India binational collaboration program. | en_US |
dc.language.iso | en | en_US |
dc.publisher | ROYAL SOC CHEMISTRY | en_US |
dc.subject | JAHN-TELLER DISTORTION | en_US |
dc.subject | HIGH-VOLTAGE | en_US |
dc.subject | LITHIUM BATTERIES | en_US |
dc.subject | RATE PERFORMANCE | en_US |
dc.subject | CO ELECTRODES | en_US |
dc.subject | LINI0.5MN1.5O4 | en_US |
dc.subject | NI | en_US |
dc.subject | LIMN2O4 | en_US |
dc.subject | TRANSFORMATION | en_US |
dc.subject | MANGANESE | en_US |
dc.title | Improved capacity and stability of integrated Li and Mn rich layered-spinel Li1.17Ni0.25Mn1.08O3 cathodes for Li-ion batteries | en_US |
dc.type | Article | en_US |
dc.relation.no | 28 | - |
dc.relation.volume | 3 | - |
dc.identifier.doi | 10.1039/c5ta02233a | - |
dc.relation.page | 14598-14608 | - |
dc.relation.journal | JOURNAL OF MATERIALS CHEMISTRY A | - |
dc.contributor.googleauthor | Nayak, Prasant Kumar | - |
dc.contributor.googleauthor | Grinblat, Judith | - |
dc.contributor.googleauthor | Levi, Mikhael | - |
dc.contributor.googleauthor | Haik, Ortal | - |
dc.contributor.googleauthor | Levi, Elena | - |
dc.contributor.googleauthor | Sun, Yang-Kook | - |
dc.contributor.googleauthor | Munichandraiah, N. | - |
dc.contributor.googleauthor | Aurbach, Doron | - |
dc.relation.code | 2015000269 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DEPARTMENT OF ENERGY ENGINEERING | - |
dc.identifier.pid | yksun | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.