282 0

Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation (vol 46A, pg 2172, 2015)

Title
Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation (vol 46A, pg 2172, 2015)
Author
Zal Nezhad, Erfan
Keywords
CHANNEL ANGULAR EXTRUSION; AEROSPACE AL7075-T6 ALLOY; REPETITIVE TUBE EXPANSION; FINITE-ELEMENT-ANALYSIS; FRETTING FATIGUE LIFE; GRAINED MATERIALS; ALUMINUM-ALLOYS; SHRINKING RTES; PURE COPPER; SPD METHOD
Issue Date
2015-06
Publisher
SPRINGER
Citation
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v. 46A, Page. 2790-2790
Abstract
In this study, the mechanical properties, including surface hardness, tensile strength, fatigue, and fretting fatigue behavior of AA 6063 processed by equal channel angular pressing as the most efficient severe shear plastic deformation (SPD) technique, were investigated. Following the SPD process, samples were subjected to heat treatment (HT), hard anodizing (HA), and a combination of HT and HA. Rotating–bending fretting fatigue tests were performed to explore the samples’ response to the fretting condition. From the experimental fatigue and fretting fatigue tests, it was apparent that the SPD treatment had a positive effect on enhancing the fatigue and fretting fatigue lives of the samples at low and high-cyclic loads compared with the HT technique by 78 and 67 pct, and 131 and 154 pct respectively. The results also indicate that the SPD + HT technique significantly increased the fatigue and fretting fatigue lives of the samples at high and low cycles by 15.56 and 8.33 pct, and 14.4 and 5.1 pct respectively, compared with the SPD method. HA of AA6063 increased the fatigue and fretting fatigue lives of SPD + HT-processed samples at low cycle by 15.5 and 18.4 pct respectively; however, at high cycle, HA had reverse effects, whereby the fatigue and fretting fatigue lives of SPD + HT-processed samples decreased by 16.7 and 30 pct, respectively.
URI
http://link.springer.com/article/10.1007%2Fs11661-015-2806-7http://hdl.handle.net/20.500.11754/25922
ISSN
1073-5623; 1543-1940
DOI
10.1007/s11661-015-2806-7
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE