Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이세헌 | - |
dc.date.accessioned | 2020-07-24T06:48:29Z | - |
dc.date.available | 2020-07-24T06:48:29Z | - |
dc.date.issued | 2019-06 | - |
dc.identifier.citation | 대한용접접합학회지, v. 37, no. 3, Page. 212-219 | en_US |
dc.identifier.issn | 1225-6153 | - |
dc.identifier.issn | 2466-2232 | - |
dc.identifier.issn | 2466-2100 | - |
dc.identifier.uri | http://e-jwj.org/journal/view.php?doi=10.5781/JWJ.2019.37.3.3 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/151889 | - |
dc.description.abstract | Dissimilar joining of aluminum and steel is one of the fundamental techniques for achieving weight reduction in the automotive industry. Self-piercing rivets have been widely adopted for the aluminum-steel lap joint because of its simplicity and high joining strength. In this study, the joining quality of the aluminum-steel joint produced by self-piercing rivets is investigated depending on the strength and thickness of the aluminum sheet. Four different tensile strengths (228, 305, 320, and 326 MPa) of aluminum are considered in this study, which corresponds to Al5052-H32, Al5754-H18, Al5083-H32 and Al6061-T6. For the thickness variation test, Al5052-H32 sheets with a thickness of 1.2, 1.5, 2.0, 2.5 mm are used. The SPR joint quality was quantified with cross-sectional visual analysis and tensile lap shear test. In aluminum(top)-steel (bottom) SPR joint, it was observed that the joint load increased with increasing aluminum strength up to 320 MPa. Nevertheless, the thickness of top aluminum was found to not affect the joint strength between the thickness of 1.5 ~ 2.5 mm. In steel(top)-aluminum(bottom) SPR joint, it was found that joint strength did not change with aluminum strength but increased with increasing aluminum thickness. | en_US |
dc.description.sponsorship | 본 연구는 산업통상자원부 산업소재핵심기술개발사업(과제번호: 10063579)의 지원을 받아 이루어졌으며,이에 관계자 여러분께 감사를 드립니다. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 대한용접접합학회 | en_US |
dc.subject | Aluminum | en_US |
dc.subject | Steel | en_US |
dc.subject | Dissimilar joint | en_US |
dc.subject | Thickness | en_US |
dc.subject | Strength of base metal | en_US |
dc.subject | Self-piercing rivet (SPR) | en_US |
dc.title | Aluminum / Steel 이종소재 접합의 모재강도 및 두께별 SPR 접합성에 관한 연구 | en_US |
dc.title.alternative | Joint Quality Study of Self-piercing Riveted Aluminum and Steel Joints Depending on the Thickness and Strength of Base Metal | en_US |
dc.type | Article | en_US |
dc.relation.no | 3 | - |
dc.relation.volume | 37 | - |
dc.identifier.doi | 10.5781/JWJ.2019.37.3.3 | - |
dc.relation.page | 212-219 | - |
dc.relation.journal | 대한용접접합학회지 | - |
dc.contributor.googleauthor | 정택언 | - |
dc.contributor.googleauthor | 김민규 | - |
dc.contributor.googleauthor | 이세헌 | - |
dc.contributor.googleauthor | 감동혁 | - |
dc.contributor.googleauthor | Jeong, Taek-Eon | - |
dc.contributor.googleauthor | Kim, Min-Gyu | - |
dc.contributor.googleauthor | Rhee, Sehun | - |
dc.contributor.googleauthor | Kam, Dong-Hyuck | - |
dc.relation.code | 2019035039 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF MECHANICAL ENGINEERING | - |
dc.identifier.pid | srhee | - |
dc.identifier.orcid | https://orcid.org/0000-0002-0039-5650 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.