269 0

Fabrication and characterization of high frequency SAW device with IDT/ZnO/AlN/Si configuration: role of AlN buffer

Title
Fabrication and characterization of high frequency SAW device with IDT/ZnO/AlN/Si configuration: role of AlN buffer
Author
박진석
Keywords
Piezoelectric ZnO thin film; AlN buffer; (0002)-orientation; Crystal quality; Surface roughness; SAW device; Insertion loss
Issue Date
2004-01
Publisher
ELSEVIER SCIENCE SA
Citation
Thin Solid Films, v. 447–448, No. 30, Page. 605-609
Abstract
Surface acoustic wave (SAW) devices with a ZnO/buffer/Si configuration have been fabricated, employing poly-AlN (deposited by RF magnetron sputtering) and epi-AlN (deposited by plasma-assisted MBE) as the buffer layer. In particular, the effects of the AlN buffers on the orientation of ZnO films as well as the performance of SAW devices are studied. Piezoelectric ZnO films are deposited using RF sputtering at a nominal condition of RF power of 300 W, O-2/(Ar+O-2) ratio of 10%, and substrate temperature of 300 degreesC. For all the deposited AlN and ZnO films, the X-ray diffraction (XRD) spectra and full width at half maximum (omega FWHM) of rocking curves are measured in terms of the deposition conditions, to characterize the c-axis preferred orientation and crystal quality. The frequency response characteristics (including S-2t) of the fabricated SAW devices are also measured. The experimental results indicate that the c-axis orientation and crystal quality of ZnO films are determined mainly by the properties of AlN buffer. Furthermore, the insertion loss of ZnO-SAW devices is found to be dependent on the crystal quality and surface morphology of AlN buffer. The correlations between the properties of AlN buffers and the characteristics of ZnO-SAW devices are also discussed in detail.
URI
https://www.sciencedirect.com/science/article/pii/S0040609003012732?via%3Dihubhttps://repository.hanyang.ac.kr/handle/20.500.11754/131990
ISSN
0040-6090
DOI
10.1016/j.tsf.2003.07.022
Appears in Collections:
COLLEGE OF ENGINEERING SCIENCES[E](공학대학) > ELECTRICAL ENGINEERING(전자공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE